Premium Information is available for this item - Upgrade for $1 a day
5315-01-395-0207
Knurled Straight Pin
5315013950207 013950207 506-6081706 ITEM 6
A headless, cylindrically-shaped, straight, solid item with or without a drilled hole(s). It has a straight or diamond knurl. Its length must not exceed 12 inches (304 MM). It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. View more Knurled Straight Pin
May 2023
1
Marketplace 5315-01-395-0207
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-395-0207 1+ Documents (More...)
Restrictions 5315-01-395-0207
5315-01-395-0207 is a Knurled Straight Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-395-0207
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5315-01-395-0207
- Part Number
- Manufacturer
- Status
- 506-6081706 ITEM 6
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-01-395-0207
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Diameter [ABMZ]
- 0.380 Inches Minimum And 0.385 Inches Maximum
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 45.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.170 Inches Minimum And 0.470 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 304 Overall
- Knurl Length [BFMT]
- 0.297 Inches Minimum And 0.327 Inches Maximum
- Knurl Outside Diameter [AQZS]
- 0.374 Inches Minimum And 0.376 Inches Maximum
- Second End Relationship With First End [CQBB]
- Identical
- Overall Length [ABHP]
- 1.1220 Inches Minimum And 1.1520 Inches Maximum
- Style Designator [STYL]
- Straight Knurled
- Surface Finish [CSYM]
- 125.0 Microinches Overall
DLA Procurement Analysis 5315-01-395-0207
Management Data 5315-01-395-0207
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5315-01-395-0207
Freight Information 5315-01-395-0207
5315-01-395-0207 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-395-0207 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-395-0207 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-395-0207 is not classified as a special type of cargo when transported by water. 5315-01-395-0207 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5315-01-395-0207 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: