Premium Information is available for this item - Upgrade for $1 a day
5315-01-374-9503
Headless Shoulder Pin
5315013749503 013749503 12933388
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. View more Headless Shoulder Pin
November 2023
3
Marketplace 5315-01-374-9503
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-374-9503 1+ Documents (More...)
NE FedMall Updated Every Day 5315-01-374-9503 RQST NE Updated Every Day 5315-01-374-9503 RQST Updated
Every Day 5315-01-374-9503 RQST NE Related Documents 5315-01-374-9503 1+ Documents ( More... ) https
Restrictions 5315-01-374-9503
5315-01-374-9503 is a Headless Shoulder Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5315-01-374-9503
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-01-374-9503
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZBF
Approved Sources 5315-01-374-9503
- Part Number
- Manufacturer
- Status
- 12933388
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-01-374-9503
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 40.0 Degrees Minimum And 50.0 Degrees Maximum
- First End Taper Length [AMCS]
- 0.065 Inches Nominal
- First End Location [CRDY]
- Long End
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum Overall And 43.0 Rockwell C Maximum Overall
- Material [MATT]
- Steel Comp 4130 Overall Or Steel Comp 4137 Overall Or Steel Comp 4140 Overall Or Steel Comp 8630 Overall Or Steel Comp 8637 Overall Or Steel Comp 8640 Overall
- Material Document And Classification [MDCL]
- Astm A322 Assn Std 1St Material Response Overall Or Astm A322 Assn Std 2Nd Material Response Overall Or Astm A322 Assn Std 3Rd Material Response Overall Or Astm A322 Assn Std 4Th Material Response Overall Or Astm A322 Assn Std 5Th Material Response Overall Or Astm A322 Assn Std 6Th Material Response Overall
- Second End Relationship With First End [CQBB]
- Not Identical
- Second End Style [AAHP]
- Square
- Second Shank Diameter [CQTR]
- 0.360 Inches Minimum And 0.370 Inches Maximum
- Second Shank Length [CWAS]
- 0.250 Inches Nominal
- Shank Diameter [AAZE]
- 0.488 Inches Minimum And 0.498 Inches Maximum
- Shank Length [AATR]
- 2.620 Inches Nominal
- Overall Length [ABHP]
- 7.875 Inches Nominal
- Special Features [FEAT]
- Cut Out On Second Shank Length 0.375 In. Long 0.340 In. Min. 0.360 In. Max. Deep
- Undercut Width [ABPC]
- 2.500 Inches Nominal
- Undercut Diameter [ABPA]
- 0.455 Inches Minimum And 0.475 Inches Maximum
- Style Designator [STYL]
- Undercut
- Surface Treatment Document And Classification [STDC]
- Mil-C-26074,Cl 2,Gr A Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Nickel Overall
Weapon Systems (WSDC) 5315-01-374-9503
DLA Procurement Analysis 5315-01-374-9503
- Last Stock Position:
- 32 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-01-374-9503
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5315-01-374-9503
Freight Information 5315-01-374-9503
5315-01-374-9503 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-374-9503 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-374-9503 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-374-9503 is not classified as a special type of cargo when transported by water. 5315-01-374-9503 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-374-9503
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5315-01-374-9503 1 Records
Contracting Technical Data File (CTDF) 5315-01-374-9503 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: