Premium Information is available for this item - Upgrade for $1 a day
5315-01-374-4735
Plain Tapered Pin
5315013744735 013744735 AS3122-06 69661-9A PLGA2506010
A cone-shaped, unthreaded, metallic or nonmetallic item, tapered through its entire length, primarily used to position and hold two or more mating parts in alignment. View more Plain Tapered Pin
August 2023
6
Marketplace 5315-01-374-4735
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-374-4735 1+ Documents (More...)
Restrictions 5315-01-374-4735
5315-01-374-4735 is a Plain Tapered Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-374-4735
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Feb 2007
- Supplementary Collaborators:
- KE
Approved Sources 5315-01-374-4735
- Part Number
- Manufacturer
- Status
- 69661-9A
- Manufacturer
- 73030 - Hamilton Sundstrand Corporation (Active)
- Source Control
- Source Control
- PLGA2506010
- 92555 - The Lee Co (Active)
- Primary Buy
- Primary Buy
- AS3122-06
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Advisory Reference
- Advisory Reference
Datasheet 5315-01-374-4735
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Style [AAGZ]
- Chamfered W/Thru Hole
- First End Taper Angle [CRMG]
- 8.0 Degrees Minimum And 11.0 Degrees Maximum
- First End Taper Length [AMCS]
- 0.496 Inches Minimum And 0.504 Inches Maximum
- First End Location [CRDY]
- Tapered End
- Hole Arrangement Style [ABRB]
- One End Drilled
- Material Document And Classification [MDCL]
- Qq-A-268 Fed Spec 1St Material Response Overall Or Qq-A-255/6 Fed Spec 2Nd Material Response Overall
- Material [MATT]
- Aluminum Alloy 2024 Overall
- Pin Overall Length [ACHT]
- 0.258 Inches Minimum And 0.272 Inches Maximum
- Second End Relationship With First End [CQBB]
- Not Identical
- Second End Style [AAHP]
- Square
- Special Features [FEAT]
- Surface Yellow And Wax
- Surface Treatment Document And Classification [STDC]
- Mil-C-5541 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Chromate Overall
Weapon Systems (WSDC) 5315-01-374-4735
DLA Procurement Analysis 5315-01-374-4735
Management Data 5315-01-374-4735
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5315-01-374-4735
Freight Information 5315-01-374-4735
5315-01-374-4735 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-374-4735 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-374-4735 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5315-01-374-4735 is not classified as a special type of cargo when transported by water. 5315-01-374-4735 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-374-4735
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5315-01-374-4735 1 Records
Contracting Technical Data File (CTDF) 5315-01-374-4735 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: