Premium Information is available for this item - Upgrade for $1 a day
5315-01-338-2904
Power Actuated Drive Pin
5315013382904 013382904 AIC943-4-2-10 11433C4-2-10 03A259-4-2-10
An item designed to fasten metal, wood, composition material and the like to concrete, masonry, metal, and wood, with power provided from a cartridge (powder), compressed gas, pneumatic and/or hydraulic power. Excludes items that have the actuating media as an integral part of the pin. View more Power Actuated Drive Pin
May 2023
10
Marketplace 5315-01-338-2904
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-338-2904 1+ Documents (More...)
/fsg-53/fsc-5315/us
BUY NE FedMall Updated Every Day 5315-01-338-2904 RQST NE Updated Every Day 5315-01-338-2904 RQST
Updated Every Day 5315-01-338-2904 RQST NE Related Documents 5315-01-338-2904 1+ Documents ( More...
Restrictions 5315-01-338-2904
5315-01-338-2904 is a Power Actuated Drive Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5315-01-338-2904
- US Air Force (FXGI)
- Effective Date:
- 1 Dec 2013
- Former MOE Rule:
- FNN5
- Supplementary Collaborators:
- TN
Approved Sources 5315-01-338-2904
- Part Number
- Manufacturer
- Status
- AIC943-4-2-10
- Manufacturer
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- 11433C4-2-10
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- 03A259-4-2-10
- 76823 - Northrop Grumman Systems Corporation (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5315-01-338-2904
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec 1St Material Response Overall Or Astm A582 Assn Std 2Nd Material Response Overall Or Qq-S-763 Fed Spec 3Rd Material Response Overall
- Material For Which Designed [BTPM]
- Steel
- Material Thickness [ABPX]
- 0.125 Inches Nominal
- Material [MATT]
- Steel Comp 302 Overall Or Steel Comp 303Se Overall Or Steel Comp 304 Overall
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Shank Diameter [AAZE]
- 0.2490 Inches Minimum And 0.2495 Inches Maximum
- Shank Length Under Washer [ABQD]
- 0.875 Inches Nominal
- Shank Length [AATR]
- 1.125 Inches Nominal
- Overall Length [ABHP]
- 1.530 Inches Nominal
- Thread Series Designator [THSD]
- Unjf
- Washer Outside Diameter [AAVX]
- 0.506 Inches Nominal
- Style Designator [STYL]
- Guided Or Powder Actuated
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.405 Inches Nominal
DLA Procurement Analysis 5315-01-338-2904
Management Data 5315-01-338-2904
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5315-01-338-2904
Freight Information 5315-01-338-2904
5315-01-338-2904 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-338-2904 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-338-2904 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-338-2904 is not classified as a special type of cargo when transported by water. 5315-01-338-2904 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5315-01-338-2904 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: