Premium Information is available for this item - Upgrade for $1 a day
5315-01-309-3025
Machine Key
5315013093025 013093025 4G53641-101A
A metallic item, usually square or rectangular in cross section, usually longer in relation to its width and thickness, with or without a head, usually designed to fit into the pre-cut slots of two adjacent cylindrically shaped members, to prevent relative rotational movement between the two. It may have mounting holes or slots. View more Machine Key
November 2023
3
Marketplace 5315-01-309-3025
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-309-3025 1+ Documents (More...)
Updated Every Day 5315-01-309-3025 RQST NE Related Documents 5315-01-309-3025 1+ Documents ( More...
FedMall Updated Every Day 5315-01-309-3025 RQST NE Updated Every Day 5315-01-309-3025 RQST Updated Every
Restrictions 5315-01-309-3025
5315-01-309-3025 is a Machine Key that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5315-01-309-3025
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-01-309-3025
- US Air Force (FGGI)
- Effective Date:
- 1 Nov 2009
- Former MOE Rule:
- FUGI
Approved Sources 5315-01-309-3025
- Part Number
- Manufacturer
- Status
- 4G53641-101A
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-01-309-3025
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Distance From Mounting Hole Center To End [CRYW]
- 0.675 Inches Minimum And 0.685 Inches Maximum
- End Item Identification [AGAV]
- Cam Strut Assy,C5 A/B
- Countersink Angle [CRSQ]
- 100.0 Degrees Nominal
- Material Document And Classification [MDCL]
- Mil-S-5626 Cond E 4 Mil Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 4140 Overall
- Mounting Hole Depth [ACJD]
- 0.300 Inches Minimum And 0.304 Inches Maximum
- Mounting Hole Diameter [ABTB]
- 0.098 Inches Nominal And 0.103 Inches Maximum
- Mounting Hole Type And Quantity [CTQY]
- 1 Unthreaded-Countersunk
- Overall Height [ABKW]
- 0.312 Inches Nominal
- Overall Length [ABHP]
- 2.000 Inches Nominal
- Overall Width [ABMK]
- 1.000 Inches Nominal
- Special Features [FEAT]
- Heat Treat 180,000-200,000 Psi Per Stp54-019
- Starting Edge Shape [CSPJ]
- Straight
- Style Designator [STYL]
- Plain
Weapon Systems (WSDC) 5315-01-309-3025
DLA Procurement Analysis 5315-01-309-3025
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-01-309-3025
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- UC
- C-5A GALAXY
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5315-01-309-3025
Freight Information 5315-01-309-3025
5315-01-309-3025 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-309-3025 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-309-3025 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-309-3025 is not classified as a special type of cargo when transported by water. 5315-01-309-3025 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-309-3025
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5315-01-309-3025 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: