Premium Information is available for this item - Upgrade for $1 a day
5315-01-299-6738
Headless Shoulder Pin
5315012996738 012996738 375-40-45 ITEM 375-40-45-28 375-05-05 ITEM 12 40-45-28 375-05-05 PART 40-45-28
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. View more Headless Shoulder Pin
May 2023
3
Marketplace 5315-01-299-6738
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-299-6738 5+ Documents (More...)
(Identification) 1/3 NSN 5315-01-299-6738 (Identification) 3/3 NSN 5315-01-299-6738 (Identification
BUY NE FedMall Updated Every Day 5315-01-299-6738 RQST NE Updated Every Day 5315-01-299-6738 RQST
day Upgrade your Account Upgrade 3120-01-295-3069Sleeve Bushing3120012953069 012953069 375-40-45 012996738
Headless Shoulder Pin 5315012996738 012996738 a day Upgrade your Account Upgrade 5315-01-299-6738Headless
/fsg-31/fsc-3120/us
Documents 3120-01-295-3069 2+ Documents ( More... https//www.nsnlookup.com /fsg-53/fsc-5315/us 5315-01-299-6738
Headless Shoulder Pin 5315012996738 012996738 www.nsnlookup.com /fsg-53/fsc-5315/us 5315-01-299
pulley with one or more grooved faces or rims of https//www.nsnlookup.com /fsg-53/fsc-5315/us 5315-01-299-6738
Headless Shoulder Pin 5315012996738 012996738 a day Upgrade your Account Upgrade 5315-01-299-6738Headless
Headless Shoulder Pin 5315012996738 012996738 Upgrade 5315-01-299-6738Headless Shoulder Pin5315012996738
012996738 375-40-45 ITEM 375-40-45-28 375-05-05 ITEM 12 40-45-28 375-05-05 PART 40-45-28 A cylindrically-shaped
Restrictions 5315-01-299-6738
5315-01-299-6738 is a Headless Shoulder Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-299-6738
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5315-01-299-6738
- Part Number
- Manufacturer
- Status
- 375-40-45-28
- Manufacturer
- 63952 - Ederer Inc (Active)
- Primary Buy
- Primary Buy
- 375-05-05 ITEM 12
- 63952 - Ederer Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 40-45-28
- 63952 - Ederer Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 375-05-05 PART 40-45-28
- 63952 - Ederer Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 375-40-45 ITEM
- 63952 - Ederer Inc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5315-01-299-6738
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Distance From Centerline Of Hole To End Of Pin [ABRE]
- 5.750 Inches Nominal
- Center To Center Distance Between Holes [ABRF]
- 7.375 Inches Nominal
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 45.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.125 Inches Nominal
- First End Location [CRDY]
- Shoulder End
- First Hole Diameter [ABRC]
- 0.344 Inches Nominal
- Hole Arrangement Style [ABRB]
- Both End Drilled
- Material [MATT]
- Steel Comp 4340 Overall
- Second End Relationship With First End [CQBB]
- Not Identical
- Second End Style [AAHP]
- Chamfered
- Second Hole Diameter [ABRD]
- 0.344 Inches Nominal
- Shank Length [AATR]
- 1.156 Inches Nominal
- Shank Diameter [AAZE]
- 4.705 Inches Minimum And 4.716 Inches Maximum
- Shoulder Diameter [AAVH]
- 4.999 Inches Minimum And 5.000 Inches Maximum
- Overall Length [ABHP]
- 19.250 Inches Nominal
- Special Features [FEAT]
- In Shoulder End Drill Three 0.344 Inch Nominal Diameter Longitudinal Holes,Equally Spaced On A 1.500 Inch Nominal Diameter Circle Circumscribed Around Axial Center,First Hole 5.938 Inches Nominal Depth Intersecting 0.344 Inch Nominal Diameter Perpendicular Hole,Tap With 0.125 National Pipe Thread,Second Hole 9.625 Inches Nominal Depth Intersecting Additional 0.344 Inch Nominal Diameter Perpendicular Hole Equidistant 3.688 Inch Nominal Distance Between Holes,Tap With 0.125 National Pipe Thread,Third Hole 13.312 Inches Nominal Depth Intersecting 0.344 Inch Nominal Diameter Perpendicular Hole Tap With 0.125 National Pipe Thread; All Three Perpendicular Holes 1.938 Inches Nominal Depth; Two Symmetrical Grooves Parallel To Shoulder End 1.125 Inches From End,0.531 Inch Nominal Width By 1.000 Inches Nominal Depth; Keyway 0.375 Inch Nominal Width 0.250 Inch Nominal Depth 1.625 Inches Nominal Length With A Full Radius Corner
- Undercut Width [ABPC]
- 0.156 Inches Nominal
- Style Designator [STYL]
- Undercut
- Surface Finish [CSYM]
- 63.0 Microinches Shoulder Outside Diameter
- Thread Length [AASA]
- 1.156 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 12
DLA Procurement Analysis 5315-01-299-6738
Management Data 5315-01-299-6738
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5315-01-299-6738
Freight Information 5315-01-299-6738
5315-01-299-6738 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-299-6738 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5315-01-299-6738 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-299-6738 is not classified as a special type of cargo when transported by water. 5315-01-299-6738 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5315-01-299-6738 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: