Premium Information is available for this item - Upgrade for $1 a day
5315-01-294-0894
Headless Shoulder Pin
5315012940894 012940894 4076419
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. View more Headless Shoulder Pin
May 2023
17
Marketplace 5315-01-294-0894
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-294-0894 1+ Documents (More...)
125 EA NS Request Quotation Updated Every Day 5315-01-294-0894 RQST NE Updated Every Day 5315-01-294
-0894 RQST Updated Every Day 5315-01-294-0894 RQST NE Related Documents 5315-01-294-0894 1+ Documents
Restrictions 5315-01-294-0894
5315-01-294-0894 is a Headless Shoulder Pin that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-294-0894
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2007
- Former MOE Rule:
- FXX5
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5315-01-294-0894
- Part Number
- Manufacturer
- Status
- 4076419
- Manufacturer
- 77445 - Rtx Corporation (Active)
- Primary Buy
- Primary Buy
- 4076419
- 52661 - Rtx Corporation (Active)
- Secondary Buy
- Secondary Buy
- 4076419
- 08244 - Moeller Mfg. Company, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4076419
- 31417 - Barnes Group Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4076419
- 2M223 - White Engineering Surfaces (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4076419
- 7W515 - Winslow Automatics Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4076419
- 97139 - The Slabe Machine Products Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4076419
- 8M938 - Pro/Des Inc Products Design Div (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5315-01-294-0894
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Counterbore Depth [AKTZ]
- 0.770 Inches Minimum And 0.830 Inches Maximum
- First End Counterbore Diameter [AKTX]
- 0.245 Inches Minimum And 0.255 Inches Maximum
- First End Style [AAGZ]
- Counterbored W/O Thru Hole
- First End Location [CRDY]
- Counterbore End
- First Step Diameter [ABPR]
- 0.433 Inches Minimum And 0.435 Inches Maximum
- First Step Length [ABPS]
- 0.035 Inches Minimum And 0.045 Inches Maximum
- Material [MATT]
- Nickel Alloy Overall
- Second End Relationship With First End [CQBB]
- Not Identical
- Second End Style [AAHP]
- Chamfered
- Second End Taper Angle [CTHC]
- 28.0 Degrees Minimum And 32.0 Degrees Maximum
- Second End Taper Length [AMFM]
- 0.040 Inches Minimum And 0.060 Inches Maximum
- Second Step Length [ABPU]
- 0.990 Inches Minimum And 1.010 Inches Maximum
- Second Step Diameter [ABPT]
- 0.525 Inches Nominal
- Shoulder Diameter [AAVH]
- 0.600 Inches Minimum And 0.620 Inches Maximum
- Overall Length [ABHP]
- 1.745 Inches Minimum And 1.775 Inches Maximum
- Style Designator [STYL]
- Shoulder
- Third Step Diameter [ABPV]
- 0.349 Inches Minimum And 0.350 Inches Maximum
- Third Step Length [ABPW]
- 0.310 Inches Nominal
Weapon Systems (WSDC) 5315-01-294-0894
DLA Procurement Analysis 5315-01-294-0894
- Last Stock Position:
- 81 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-01-294-0894
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NZ
- PRATT & WHITNEY JET ENGINES & COMPONENTS, F-100–P-100
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5315-01-294-0894
Freight Information 5315-01-294-0894
5315-01-294-0894 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5315-01-294-0894 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-294-0894 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-294-0894 is not classified as a special type of cargo when transported by water. 5315-01-294-0894 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-294-0894
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5315-01-294-0894 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A621F473C
- 10 Sep 2021
- Subscribe
- 250
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F473C
- 10 Sep 2021
- Subscribe
- 250
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F395R
- 12 Aug 2021
- Subscribe
- 3
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F395R
- 12 Aug 2021
- Subscribe
- 3
- Subscribe
- Subscribe
- Subscribe
- SPE4AX13D94241260
- 18 Dec 2015
- Subscribe
- 49
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5315-01-294-0894 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: