Premium Information is available for this item - Upgrade for $1 a day
5315-01-282-8010
Headless Shoulder Pin
5315012828010 012828010 9526M67P03
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. View more Headless Shoulder Pin
November 2023
8
Marketplace 5315-01-282-8010
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-282-8010 1+ Documents (More...)
Headless Shoulder Pin 5315012828010 012828010 5315-01-282-8010 5315012828010 012828010 is a cylindrically-shaped
Restrictions 5315-01-282-8010
5315-01-282-8010 is a Headless Shoulder Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-282-8010
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- KE
- Poland (WP01)
- Effective Date:
- 1 Jul 2007
- Republic of Korea (ZH01)
- Effective Date:
- 1 Sep 2010
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 5315-01-282-8010
- Part Number
- Manufacturer
- Status
- 9526M67P03
- Manufacturer
- 07482 - General Electric Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-01-282-8010
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 15.0 Degrees Minimum And 25.0 Degrees Maximum
- First End Taper Length [AMCS]
- 0.080 Inches Nominal
- First End Location [CRDY]
- Chamfered End
- Material [MATT]
- Nickel Alloy 718 Overall
- Second End Relationship With First End [CQBB]
- Not Identical
- Second End Style [AAHP]
- Square
- Second Shank Diameter [CQTR]
- 0.2503 Inches Minimum And 0.2505 Inches Maximum
- Second Shank Length [CWAS]
- 0.330 Inches Minimum And 0.350 Inches Maximum
- Shank Diameter [AAZE]
- 0.2440 Inches Minimum And 0.2445 Inches Maximum
- Shank Length [AATR]
- 0.095 Inches Minimum And 0.105 Inches Maximum
- Shoulder Diameter [AAVH]
- 0.310 Inches Minimum And 0.330 Inches Maximum
- Overall Length [ABHP]
- 0.470 Inches Nominal
- Special Features [FEAT]
- Shoulder Length Is .025 In Minus And .035 In Plus. There Is A Radius Of.005 In Minus And .015 In Plus Under Shoulder On Chamfer End
- Style Designator [STYL]
- Shoulder
Weapon Systems (WSDC) 5315-01-282-8010
DLA Procurement Analysis 5315-01-282-8010
- Last Stock Position:
- 438 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-01-282-8010
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- PR
- F11O GE 100 ENGINE
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5315-01-282-8010
Freight Information 5315-01-282-8010
5315-01-282-8010 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 094380. A Sub NMFC of X. It has a NMFC Description of COTTER PINS/SPRING COTTERS IRON. 5315-01-282-8010 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49340 which rates the freight between FCL and LCL. 5315-01-282-8010 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-282-8010 is not classified as a special type of cargo when transported by water. 5315-01-282-8010 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-282-8010
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Container
Contracting Technical Data File (CTDF) 5315-01-282-8010 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: