Premium Information is available for this item - Upgrade for $1 a day
5315-01-175-3910
Headed Straight Pin
5315011753910 011753910 9942M96P01
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC. View more Headed Straight Pin
November 2023
3
Marketplace 5315-01-175-3910
Request a Quotation from participating marketplace vendors
Restrictions 5315-01-175-3910
5315-01-175-3910 is a Headed Straight Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5315-01-175-3910
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-01-175-3910
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- United States of America (ZZ)
Approved Sources 5315-01-175-3910
- Part Number
- Manufacturer
- Status
- 9942M96P01
- Manufacturer
- 07482 - General Electric Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-01-175-3910
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Distance From Centerline Of Hole To End Of Pin [ABRE]
- 0.095 Inches Nominal
- Chamfer Length [AAZP]
- 0.020 Inches Minimum And 0.040 Inches Maximum
- Diameter [ABMZ]
- 0.246 Inches Minimum And 0.248 Inches Maximum
- First Hole Diameter [ABRC]
- 0.066 Inches Minimum And 0.070 Inches Maximum
- Head Style [AASK]
- Round W/Wrench Flats
- Height [HGTH]
- 0.055 Inches Minimum And 0.065 Inches Maximum
- Hole Arrangement Style [ABRB]
- One End Drilled
- Material [MATT]
- Cobalt Alloy Overall
- Material Document And Classification [MDCL]
- B50tf74 Cl-A,07482 Mfr Ref Single Material Response Overall
- Pin Head Diameter [CRRG]
- 0.400 Inches Minimum And 0.420 Inches Maximum
- Pin Chamfer Angle [CQPJ]
- 45.0 Degrees Nominal
- Special Features [FEAT]
- Shank Is Flatted Two Sides 0.190 In. Width Across Flats And Parallel W/Wrench Flats On Head
- Under Head Length [ABPB]
- 0.500 Inches Minimum And 0.520 Inches Maximum
- Width Across Flats [ASDB]
- 0.290 Inches Minimum And 0.310 Inches Maximum
- Style Designator [STYL]
- Straight
Weapon Systems (WSDC) 5315-01-175-3910
DLA Procurement Analysis 5315-01-175-3910
- Last Stock Position:
- 229 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-01-175-3910
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- JF
- F-101 ENGINE
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5315-01-175-3910
Freight Information 5315-01-175-3910
5315-01-175-3910 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-175-3910 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5315-01-175-3910 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-175-3910 is not classified as a special type of cargo when transported by water. 5315-01-175-3910 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5315-01-175-3910 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: