Premium Information is available for this item - Upgrade for $1 a day

5315-01-124-1086

Headless Straight Pin

5315011241086 011241086 580041 580010 A-3542

A headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD,STRAIGHT,HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN,STRAIGHT,THREADED. View more Headless Straight Pin

Managed by United States

NSN Created on 27 Dec 1981

Data Last Changed
May 2023

NATO Update Count
6

NATO Data Quality

5315-01-124-1086 PIN,STRAIGHT,HEADLESS 5315011241086 011241086 1/1 — NSN 5315-01-124-1086 (Generic Image) 1/1

Marketplace 5315-01-124-1086

Need Help?
Request a Quotation from participating marketplace vendors

Subscribe to View Vendor Details...

580010 PIN,STRAIGHT,HEADLESS 7 EA NS

FedMall

Updated Every 15 Minutes

5315-01-124-1086 BUY NE FedMall

Updated Every Day

5315-01-124-1086 RQST NE

Updated Every Day

5315-01-124-1086 RQST

Updated Every Day

5315-01-124-1086 RQST NE

Related Documents 5315-01-124-1086 5+ Documents (More...)

https//www.nsnlookup.com
/cage

A.M.R.E. Avvolgimenti Motori (CAGE Code A3542)

CAGE A3542 A.M.R.E. Avvolgimenti Motori in Carpi, Mo Italy

https//www.nsnlookup.com
/fsg-59/fsc-5977/it

5977-15-186-7911 Electrical Contact Brush 5977151867911

5977-15-186-7911 5977151867911 151867911 is an item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. either the brush or the surface is continually moving during the transfer of energy. the brush is usually composed in part of some form of the element carbon. includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. excludes: contact, electrical; and contact assembly, electrical.

https//www.nsnlookup.com
/fsg-59/fsc-5977/it

5977-15-186-7910 Electrical Contact Brush 5977151867910

5977-15-186-7910 5977151867910 151867910 is an item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. either the brush or the surface is continually moving during the transfer of energy. the brush is usually composed in part of some form of the element carbon. includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. excludes: contact, electrical; and contact assembly, electrical.

https//www.nsnlookup.com
/fsg-61/fsc-6105/it

6105-15-186-7908 Control Motor 6105151867908 151867908,2103

6105-15-186-7908 6105151867908 151867908 is a motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. in the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. low inertia and rapid reversibility are inherent characteristics of this type of motor. see also servomotor, automatic pilot.

https//www.nsnlookup.com
/fsg-12/fsc-1280/us

1280-00-390-5969 Support Block 1280003905969 003905969

1280-00-390-5969 1280003905969 003905969 SUPPORT BLOCK

Restrictions 5315-01-124-1086

5315-01-124-1086 is a Headless Straight Pin Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.

End Users 5315-01-124-1086

US Navy (N9BZ)
Effective Date:: 1 Mar 2006
Former MOE Rule:: N9ZD
Supplementary Collaborators:: HD; AMC 2 AMSC G IMC Z IMCACTY HD

Approved Sources 5315-01-124-1086

Subscribe
View Data

DLA Procurement Analysis 5315-01-124-1086

DLA Administrative Lead Time:: Subscribe
DLA Production Lead Time:: Subscribe

Subscribe to View DLA Inventory and Forecast...

Management Data 5315-01-124-1086

Subscribe
View Prices

Effective Date: Organization; Unit of Issue; Unit Price; Qty Unit Pack
Oct 2022: Defense Logistics Agency (DS); EA; Subscribe; 1
Oct 2021: Department of the Navy (DN); EA; Subscribe; 1
Oct 2020: Department of the Navy (DN); EA; Subscribe; 1
Oct 2019: Department of the Navy (DN); EA; Subscribe; 1

Navy

Cognizance:

9B: Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg

NATO Stock Numbers Related to 5315-01-124-1086

5315-12-360-3710 5315-37-519-5512 5315-14-252-0687 5315-15-005-4554 5315-14-417-4343 5315-14-378-8984 5315-34-038-1317 5315-99-748-0669 5315-14-496-2144 5315-14-565-9767 5315-33-209-7425 5315-17-104-8217 5315-66-159-1749 5315-99-139-2588 5315-33-126-3291 5315-12-352-0812 5315-99-219-5605 5315-99-529-4581

Freight Information 5315-01-124-1086

5315-01-124-1086 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 105000. A Sub NMFC of X. It has a NMFC Description of DOWEL PINS I/S NOI IN BAG/BBL/BOXES. 5315-01-124-1086 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54080 which rates the freight between FCL and LCL. 5315-01-124-1086 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-124-1086 is not classified as a special type of cargo when transported by water. 5315-01-124-1086 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

Packaging Data 5315-01-124-1086

Responsible Activity
Packaging Data Source: Primary Inventory Control Activity (PICA); --

Item Pack Level (Unpackaged)

Item Size
Item Weight
Characteristics
Weight/Dimensions Category
Fragility
Item Preservation: --; --; Plated/Coated Item; 2lb or less, one dimension 2" or less, other dimensions less than 24"; Above 110G; No Requirement

Unit Pack Level (Packaged)

Quantity per Pack
Unit Size
Unit Weight
Unit Cube
Preservation Method
Cleaning/Drying: 1; --; --; --; --; Any Suitable Process

Preservation Material
Wrapping Material
Cushioning/Dunnage
Cushioning Thickness
Container
Special Marking: --; --; --; --; --; No special marking

Intermediate Pack Level

Quantity of Unit Packs
Container: See Method of Preservation; --

Contracting Technical Data File (CTDF) 5315-01-124-1086 February 2021

Criticality and Quality

Critical Item Code:
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):: N

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required:

Subscribe
View CTDF

Subscribe to View CTDF Details...