Premium Information is available for this item - Upgrade for $1 a day
5315-01-115-8947
Headless Shoulder Pin
5315011158947 011158947 167C2954
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. View more Headless Shoulder Pin
November 2023
16
Marketplace 5315-01-115-8947
Request a Quotation from participating marketplace vendors
Restrictions 5315-01-115-8947
5315-01-115-8947 is a Headless Shoulder Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-115-8947
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- Poland (WP01)
- Effective Date:
- 1 Mar 2007
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Nov 1995
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 2008
- Netherlands (ZN01)
- Effective Date:
- 1 May 2009
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5315-01-115-8947
- Part Number
- Manufacturer
- Status
- 167C2954
- Manufacturer
- 05606 - General Dynamics-Ots, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-01-115-8947
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Distance From Centerline Of Hole To End Of Pin [ABRE]
- 0.300 Inches Nominal
- First End Location [CRDY]
- Both Ends
- First End Style [AAGZ]
- Square
- First Hole Diameter [ABRC]
- 0.125 Inches Minimum And 0.129 Inches Maximum
- Hole Arrangement Style [ABRB]
- One End Drilled
- Material Document And Classification [MDCL]
- Qq-A-225/8,T6 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 6061 Overall
- Second End Relationship With First End [CQBB]
- Identical
- Shank Diameter [AAZE]
- 0.480 Inches Minimum And 0.500 Inches Maximum
- Shank Length [AATR]
- 1.970 Inches Minimum And 2.030 Inches Maximum
- Shoulder Diameter [AAVH]
- 0.990 Inches Minimum And 1.010 Inches Maximum
- Overall Length [ABHP]
- 5.970 Inches Minimum And 6.030 Inches Maximum
- Style Designator [STYL]
- Shoulder
- Surface Finish [CSYM]
- 250.0 Microinches Both Ends
- Surface Treatment Document And Classification [STDC]
- Mil-Std-171,7.2.1 Mil Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
Weapon Systems (WSDC) 5315-01-115-8947
DLA Procurement Analysis 5315-01-115-8947
- Last Stock Position:
- 62 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-01-115-8947
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5315-01-115-8947
Freight Information 5315-01-115-8947
5315-01-115-8947 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-115-8947 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5315-01-115-8947 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-115-8947 is not classified as a special type of cargo when transported by water. 5315-01-115-8947 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-115-8947
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5315-01-115-8947 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: