Premium Information is available for this item - Upgrade for $1 a day
5315-01-112-8101
Headed Grooved Pin
5315011128101 011128101 74A450995-2001 10122897
A cylindrically-shaped headed item, having circular or longitudinal groove(s). View more Headed Grooved Pin
November 2023
17
Marketplace 5315-01-112-8101
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-112-8101 1+ Documents (More...)
(Identification) 1/3 NSN 5315-01-112-8101 (Identification) 2/3 NSN 5315-01-112-8101 (Identification
RQST NE Updated Every Day 5315-01-112-8101 RQST Updated Every Day 5315-01-112-8101 RQST NE Related
Restrictions 5315-01-112-8101
5315-01-112-8101 is a Headed Grooved Pin that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-112-8101
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Finland (WF01)
- Effective Date:
- 1 Aug 2009
- Spain (YB01)
- Effective Date:
- 1 Jun 1999
- Malaysia (YW01)
- Effective Date:
- 1 Aug 1997
- Australia (ZA01)
- Effective Date:
- 1 Aug 2008
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5315-01-112-8101
- Part Number
- Manufacturer
- Status
- 74A450995-2001
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- 74A450995-2001
- 6Z056 - Cm Manufacturing Inc (Active)
- Secondary Buy
- Secondary Buy
- 74A450995-2001
- 85941 - Magellan Aerospace New York Inc (Active)
- Secondary Buy
- Secondary Buy
- 74A450995-2001
- 2M490 - Nassau Tool Works, Inc (Active)
- Secondary Buy
- Secondary Buy
- 74A450995-2001
- 2U518 - Blair Industries Inc (Active)
- Secondary Buy
- Secondary Buy
- 74A450995-2001
- 35962 - Safran Landing Systems Canada Inc. (Active)
- Secondary Buy
- Secondary Buy
- 74A450995-2001
- 5ZSC8 - Hdi Landing Gear Usa Inc (Active)
- Secondary Buy
- Secondary Buy
- 74A450995-2001
- S5495 - Israel Aerospace Industries Ltd. (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 74A450995-2001
- 17576 - Goodrich Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 74A450995-2001
- 9K006 - Circor Aerospace, Inc. (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 74A450995-2001
- 36164 - Heroux-Devtek Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 74A450995-2001
- 32168 - All Tools, Inc. (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 10122897
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
- 74A450995-2001
- 1935A - Israel Aerospace Industries (Active)
- Advisory Reference
- Advisory Reference
- 74A450995-2001
- 50601 - Circor Aerospace, Inc. (Active)
- Advisory Reference
- Advisory Reference
- 74A450995-2001
- 13002 - Goodrich Corporation (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5315-01-112-8101
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Effective Length [ABNZ]
- 1.177 Inches Nominal
- Diameter [ABMZ]
- 0.623 Inches Minimum And 0.624 Inches Maximum
- First End Style [AAGZ]
- Square
- First Hole Diameter [ABRC]
- 0.189 Inches Minimum And 0.190 Inches Maximum
- Grip Length [ANEE]
- 1.271 Inches Minimum And 1.273 Inches Maximum
- Head Style [AASK]
- Round W/Wrench Flats Chamfered
- Height [HGTH]
- 0.220 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-A-225/9 T73 Or T7351 Fed Spec Single Material Response Overall Or Qq-A-200/11 T73 Or T73510 Or T73511 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 7075 Overall
- Special Features [FEAT]
- 0.375 In. Dia By 1.125 In. Dp Concentric Hole In Shank End On Axial Centerline
- Pin Head Diameter [CRRG]
- 1.000 Inches Nominal
- Undercut Diameter [ABPA]
- 0.585 Inches Minimum And 0.595 Inches Maximum
- Under Head Length [ABPB]
- 1.780 Inches Nominal
- Undercut Width [ABPC]
- 0.090 Inches Nominal
- Width Across Flats [ASDB]
- 0.880 Inches Nominal
- Style Designator [STYL]
- Groove
- Surface Finish [CSYM]
- 32.0 Microinches Shank End
Weapon Systems (WSDC) 5315-01-112-8101
DLA Procurement Analysis 5315-01-112-8101
- Last Stock Position:
- 57 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-01-112-8101
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5315-01-112-8101
Freight Information 5315-01-112-8101
5315-01-112-8101 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013120. A Sub NMFC of F. It has a NMFC Description of ALUMINUM ARTICLE NOI SUB 6. 5315-01-112-8101 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05380 which rates the freight between FCL and LCL. 5315-01-112-8101 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-112-8101 is not classified as a special type of cargo when transported by water. 5315-01-112-8101 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-112-8101
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5315-01-112-8101 2 Records
Contracting Technical Data File (CTDF) 5315-01-112-8101 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: