Premium Information is available for this item - Upgrade for $1 a day
5315-01-105-2048
Headless Shoulder Pin
5315011052048 011052048 621-2503-002
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. View more Headless Shoulder Pin
November 2023
7
Marketplace 5315-01-105-2048
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-105-2048 2+ Documents (More...)
Every Day 5315-01-105-2048 RQST Updated Every Day 5315-01-105-2048 RQST NE Related Documents 5315-01
Day 5315-01-105-2048 RQST Updated Every Day 5315-01-105-2048 RQST NE Restrictions 5315-01-105- https
Headless Shoulder Pin 5315011052048 011052048 day Upgrade your Account Upgrade 5315-01-105-2048Headless
Shoulder Pin5315011052048 011052048 621-2503-002 Quotation from participating marketplace vendors Request
Restrictions 5315-01-105-2048
5315-01-105-2048 is a Headless Shoulder Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-105-2048
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5315-01-105-2048
- Part Number
- Manufacturer
- Status
- 621-2503-002
- Manufacturer
- 13499 - Rockwell Collins, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-01-105-2048
- Characteristic
- Specifications
- Distance From Centerline Of Hole To End Of Pin [ABRE]
- Specifications
- 0.908 Inches Nominal
- First End Location [CRDY]
- Chamfered End
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 45.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.015 Inches Nominal
- First Hole Diameter [ABRC]
- 0.047 Inches Minimum And 0.048 Inches Maximum
- Hole Arrangement Style [ABRB]
- One End Drilled
- Material [MATT]
- Steel Comp 303 Overall
- Material Document And Classification [MDCL]
- Astm A582,Cond A Assn Std Single Material Response Overall
- Second End Relationship With First End [CQBB]
- Identical
- Shank Diameter [AAZE]
- 0.123 Inches Minimum And 0.124 Inches Maximum
- Shank Length [AATR]
- 0.500 Inches Nominal
- Shoulder Diameter [AAVH]
- 0.1861 Inches Minimum And 0.1868 Inches Maximum
- Overall Length [ABHP]
- 2.260 Inches Minimum And 2.270 Inches Maximum
- Special Features [FEAT]
- Center Of Hole Is Measured From Small End Of Pin
- Style Designator [STYL]
- Shoulder
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
Similar Supply Items to 5315-01-105-2048
Freight Information 5315-01-105-2048
5315-01-105-2048 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5315-01-105-2048 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-105-2048 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-105-2048 is not classified as a special type of cargo when transported by water. 5315-01-105-2048 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-105-2048
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --