Premium Information is available for this item - Upgrade for $1 a day
5315-01-044-6704
Hollow Pin
5315010446704 010446704 16M215-9 16M215-7
A cylindrically-shaped headless item, having a straight smooth body and a hole through the longitudinal center. Its length must not exceed five times its diameter or 12 inches (304 mm), whichever is greater. Excludes BEARING, SLEEVE; and PIN, PISTON. View more Hollow Pin
November 2023
17
Marketplace 5315-01-044-6704
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-044-6704 1+ Documents (More...)
Restrictions 5315-01-044-6704
5315-01-044-6704 is a Hollow Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5315-01-044-6704
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-01-044-6704
- US Air Force (FUGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FUKZ
- Poland (WP01)
- Effective Date:
- 1 Dec 2006
- Israel (YD01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
- Turkey (ZW01)
- Effective Date:
- 1 Dec 1995
Approved Sources 5315-01-044-6704
- Part Number
- Manufacturer
- Status
- 16M215-9
- Manufacturer
- 81755 - Lockheed Martin Corporation (Active)
- Primary Buy
- Primary Buy
- 16M215-7
- 81755 - Lockheed Martin Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5315-01-044-6704
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Distance From Centerline Of Hole To End Of Pin [ABRE]
- 0.375 Inches Nominal
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 45.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.060 Inches Nominal
- First Hole Diameter [ABRC]
- 0.255 Inches Minimum And 0.260 Inches Maximum
- Hole Arrangement Style [ABRB]
- One End Drilled
- Material [MATT]
- Steel Overall
- Inside Diameter [AARX]
- 0.406 Inches Minimum And 0.416 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5629 Assn Std Single Material Response Overall
- Pin Overall Diameter [ACHU]
- 0.8722 Inches Minimum And 0.8737 Inches Maximum
- Pin Overall Length [ACHT]
- 7.000 Inches Nominal
- Second End Counterbore Depth [AKVA]
- 0.800 Inches Nominal
- Second End Counterbore Diameter [AKTY]
- 0.687 Inches Nominal
- Second End Style [AAHP]
- Counterbored W/Thru Hole
- Second End Relationship With First End [CQBB]
- Not Identical
- Special Features [FEAT]
- Id Has 125.0 Microinch Surface; Od Has 16.0 Microinch Surface Finish
Weapon Systems (WSDC) 5315-01-044-6704
DLA Procurement Analysis 5315-01-044-6704
- Last Stock Position:
- 6 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-01-044-6704
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- WF
- F-16 AIR COMBAT FIGHTER
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5315-01-044-6704
Freight Information 5315-01-044-6704
5315-01-044-6704 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095630. A Sub NMFC of X. It has a NMFC Description of LAP/CONNECTING LINKS/RINGS STEEL. 5315-01-044-6704 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 5315-01-044-6704 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 50070 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-044-6704 is not classified as a special type of cargo when transported by water. 5315-01-044-6704 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-044-6704
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5315-01-044-6704 1 Records
Contracting Technical Data File (CTDF) 5315-01-044-6704 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: