Premium Information is available for this item - Upgrade for $1 a day
5315-01-031-4444
Headless Straight Pin
5315010314444 010314444 NASM51932 MS51932-121
A headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD,STRAIGHT,HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN,STRAIGHT,THREADED. View more Headless Straight Pin
November 2023
6
Marketplace 5315-01-031-4444
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-031-4444 5+ Documents (More...)
(Identification) 1/2 NSN 5315-01-031-4444 (Identification) 2/2 - - 1.
United States (US) 4. 5315-01-031-4444 Marketplace Restrictions Approved Sources Datasheet Management
a day Upgrade your Account Upgrade 5315-00-926-5752Headless Straight Pin5315009265752 009265752 NASM51932
a day Upgrade your Account Upgrade 5315-01-031-4444Headless Straight Pin5315010314444 010314444 NASM51932
a day Upgrade your Account Upgrade 5315-00-131-7018Headless Straight Pin5315001317018 001317018 NASM51932
Headless Straight Pin 5315010314444 010314444 a day Upgrade your Account Upgrade 5315-01-031-4444Headless
Headless Straight Pin 5315010314444 010314444 NASM51932 a day Upgrade your Account Upgrade 5315
-00-058-3555Headless Straight Pin5315000583555 000583555 NASM51932 a day Upgrade your Account Upgrade
a day Upgrade your Account Upgrade 5315-00-926-5752Headless Straight Pin5315009265752 009265752 NASM51932
a day Upgrade your Account Upgrade 5315-00-058-3555Headless Straight Pin5315000583555 000583555 NASM51932
Restrictions 5315-01-031-4444
5315-01-031-4444 is a Headless Straight Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5315-01-031-4444
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-01-031-4444
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- BF
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- MC10
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5315-01-031-4444
- Part Number
- Manufacturer
- Status
- MS51932-121
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NASM51932
- 80205 - National Aerospace Standards (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MS51932-121
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5315-01-031-4444
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Distance From Centerline Of Hole To End Of Pin [ABRE]
- 0.2015 Inches Minimum And 0.2335 Inches Maximum
- Center To Center Distance Between Holes [ABRF]
- 3.690 Inches Nominal
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 15.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.109 Inches Nominal
- First Hole Diameter [ABRC]
- 0.140 Inches Nominal
- Hole Arrangement Style [ABRB]
- Both End Drilled
- Material [MATT]
- Steel Comp 1117 Overall Or Steel Comp 1118 Overall
- Material Document And Classification [MDCL]
- Aisi Assn Std All Material Responses Overall
- Pin Overall Diameter [ACHU]
- 0.4970 Inches Minimum And 0.5000 Inches Maximum
- Pin Overall Length [ACHT]
- 4.125 Inches Nominal
- Second End Relationship With First End [CQBB]
- Identical
- Second Hole Diameter [ABRD]
- 0.140 Inches Nominal
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 2,Cl 3 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
Weapon Systems (WSDC) 5315-01-031-4444
DLA Procurement Analysis 5315-01-031-4444
- Last Stock Position:
- 361 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-01-031-4444
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5315-01-031-4444
Freight Information 5315-01-031-4444
5315-01-031-4444 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5315-01-031-4444 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-031-4444 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-031-4444 is not classified as a special type of cargo when transported by water. 5315-01-031-4444 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-031-4444
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 5315-01-031-4444 1 Records
Contracting Technical Data File (CTDF) 5315-01-031-4444 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: