Premium Information is available for this item - Upgrade for $1 a day
5315-01-019-7433
Headed Straight Pin
5315010197433 010197433 524133
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC. View more Headed Straight Pin
November 2023
4
Marketplace 5315-01-019-7433
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-019-7433 4+ Documents (More...)
/fsg-31/fsc-3120/us
Restrictions 5315-01-019-7433
5315-01-019-7433 is a Headed Straight Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5315-01-019-7433
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5315-01-019-7433
- Part Number
- Manufacturer
- Status
- 524133
- Manufacturer
- 97139 - The Slabe Machine Products Llc (Active)
- Primary Buy
- Primary Buy
- 524133
- 56055 - Precision Speed Manufacturing, Llc (Active)
- Secondary Buy
- Secondary Buy
- 524133
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 524133
- 11449 - Turbo Power & Marine System Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5315-01-019-7433
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Distance From Centerline Of Hole To End Of Pin [ABRE]
- 0.125 Inches Nominal
- Diameter [ABMZ]
- 0.176 Inches Minimum And 0.180 Inches Maximum
- First Hole Diameter [ABRC]
- 0.065 Inches Minimum And 0.075 Inches Maximum
- Head Style [AASK]
- Flat
- Height [HGTH]
- 0.090 Inches Minimum And 0.110 Inches Maximum
- Hole Arrangement Style [ABRB]
- One End Drilled
- Material [MATT]
- Steel Comp 303 Overall Or Steel Comp 303Se Overall Or Steel Comp 303 Plus X Overall
- Material Document And Classification [MDCL]
- Ams 5640 Assn Std Single Material Response Overall
- Pin Head Diameter [CRRG]
- 0.335 Inches Minimum And 0.345 Inches Maximum
- Under Head Length [ABPB]
- 0.460 Inches Minimum And 0.480 Inches Maximum
- Style Designator [STYL]
- Straight
Weapon Systems (WSDC) 5315-01-019-7433
DLA Procurement Analysis 5315-01-019-7433
- Last Stock Position:
- 147 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-01-019-7433
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- RV
- PRATT & WHITNEY JET ENGINES & COMPONENTS TF-33
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5315-01-019-7433
Freight Information 5315-01-019-7433
5315-01-019-7433 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-019-7433 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5315-01-019-7433 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 575 for ocean manifesting and military sealift. 5315-01-019-7433 is not classified as a special type of cargo when transported by water. 5315-01-019-7433 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-019-7433
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5315-01-019-7433 3 Records
Contracting Technical Data File (CTDF) 5315-01-019-7433 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: