Premium Information is available for this item - Upgrade for $1 a day
5315-01-008-2532
Headless Straight Pin
5315010082532 010082532 NASM51932 MS51932-3
A headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD,STRAIGHT,HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN,STRAIGHT,THREADED. View more Headless Straight Pin
August 2023
13
Marketplace 5315-01-008-2532
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-008-2532 5+ Documents (More...)
MS51932-3 PIN 87 EA NS Request Quotation MS51932-3 PIN 31 EA NS Request Quotation Subscribe to View Vendor
MS51932-3 PIN,STRAIGHT,HEADLESS 2 EA NS Request Quotation Updated Every Day 5315-01-008-2532 RQST NE
a day Upgrade your Account Upgrade 5315-00-131-7018Headless Straight Pin5315001317018 001317018 NASM51932
a day Upgrade your Account Upgrade 5315-01-031-4444Headless Straight Pin5315010314444 010314444 NASM51932
a day Upgrade your Account Upgrade 5315-00-058-3555Headless Straight Pin5315000583555 000583555 NASM51932
a day Upgrade your Account Upgrade 5315-00-058-3555Headless Straight Pin5315000583555 000583555 NASM51932
Headless Straight Pin 5315010082532 010082532 a day Upgrade your Account Upgrade 5315-01-008-2532Headless
Straight Pin5315010082532 010082532 NASM51932 a day Upgrade your Account Upgrade 5315-00-926-5752Headless
a day Upgrade your Account Upgrade 5315-00-926-5752Headless Straight Pin5315009265752 009265752 NASM51932
Headless Straight Pin 5315010082532 010082532 a day Upgrade your Account Upgrade 5315-01-008-2532Headless
Restrictions 5315-01-008-2532
5315-01-008-2532 is a Headless Straight Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5315-01-008-2532
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-01-008-2532
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 13 Dec 2013
- Supplementary Collaborators:
- GG
- Morocco (YP01)
- Effective Date:
- 17 Nov 2008
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5315-01-008-2532
- Part Number
- Manufacturer
- Status
- MS51932-3
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NASM51932
- 80205 - National Aerospace Standards (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 5315010082532
- SCY13 - E.C.A Etablissement (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- MS51932-3
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5315010082532
- A00AM - E.C.A Etablissement Central Des (Active)
- NATO Reference
- NATO Reference
Datasheet 5315-01-008-2532
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Material [MATT]
- Steel Comp 1117 Or
- Material [MATT]
- Steel Comp 1118 Overall
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 2,Cl 3 Fed Spec Single Treatment Response Overall
- First End Style [AAGZ]
- Chamfered
- First End Taper Length [AMCS]
- 0.062 Inches Nominal
- First End Taper Angle [CRMG]
- 15.0 Degrees Nominal
- Second End Relationship With First End [CQBB]
- Identical
- Hole Arrangement Style [ABRB]
- Both End Drilled
- First Hole Diameter [ABRC]
- 0.076 Inches Nominal
- Second Hole Diameter [ABRD]
- 0.076 Inches Nominal
- Distance From Centerline Of Hole To End Of Pin [ABRE]
- 0.122 Inches Nominal
- Center To Center Distance Between Holes [ABRF]
- 0.756 Inches Nominal
- Pin Overall Length [ACHT]
- 1.000 Inches Nominal
- Pin Overall Diameter [ACHU]
- 0.2480 Inches Minimum And
- Pin Overall Diameter [ACHU]
- 0.2500 Inches Maximum
DLA Procurement Analysis 5315-01-008-2532
Management Data 5315-01-008-2532
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5315-01-008-2532
Freight Information 5315-01-008-2532
5315-01-008-2532 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5315-01-008-2532 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-008-2532 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-008-2532 is not classified as a special type of cargo when transported by water. 5315-01-008-2532 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-01-008-2532
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5315-01-008-2532 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: