Premium Information is available for this item - Upgrade for $1 a day
5315-00-828-5574
Hollow Pin
5315008285574 008285574 4G13003-103A
A cylindrically-shaped headless item, having a straight smooth body and a hole through the longitudinal center. Its length must not exceed five times its diameter or 12 inches (304 mm), whichever is greater. Excludes BEARING, SLEEVE; and PIN, PISTON. View more Hollow Pin
November 2023
4
Marketplace 5315-00-828-5574
Request a Quotation from participating marketplace vendors
Related Documents 5315-00-828-5574 1+ Documents (More...)
Restrictions 5315-00-828-5574
5315-00-828-5574 is a Hollow Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5315-00-828-5574
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-00-828-5574
- US Air Force (FGGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FGKZ
- US Air Force (FUGI)
- Effective Date:
- 1 Jan 2015
Approved Sources 5315-00-828-5574
- Part Number
- Manufacturer
- Status
- 4G13003-103A
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-00-828-5574
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Countersink Angle [CSJF]
- 60.0 Degrees Minimum
- First End Countersink Diameter [CTBY]
- 0.875 Inches Nominal
- First End Style [AAGZ]
- Square
- Material [MATT]
- Steel Overall
- Inside Diameter [AARX]
- 0.256 Inches Minimum And 0.263 Inches Maximum
- Material Document And Classification [MDCL]
- 300M Tricent St-05-501 Fscm 98897 Mfr Ref Single Material Response Overall
- Pin Overall Length [ACHT]
- 3.810 Inches Nominal
- Second End Countersink Angle [CQXS]
- 60.0 Degrees Minimum
- Second End Countersink Diameter [CWHB]
- 0.875 Inches Nominal
- Second End Relationship With First End [CQBB]
- Identical
- Second End Style [AAHP]
- Square
- Pin Overall Diameter [ACHU]
- 1.2490 Inches Nominal
- Surface Treatment [SFTT]
- Cadmium Overall
Weapon Systems (WSDC) 5315-00-828-5574
DLA Procurement Analysis 5315-00-828-5574
- Last Stock Position:
- 88 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-00-828-5574
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LE
- LANDING GEAR SYSTEMS AND COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5315-00-828-5574
Freight Information 5315-00-828-5574
5315-00-828-5574 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-00-828-5574 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-00-828-5574 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5315-00-828-5574 is not classified as a special type of cargo when transported by water. 5315-00-828-5574 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5315-00-828-5574 1 Records
Contracting Technical Data File (CTDF) 5315-00-828-5574 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: