5315-00-679-3382

Documents 5970-00-007-9603 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5315/us 5315-00-679-3382
Headless Straight Pin 5315006793382 006793382 -9603 5910270079603 270079603 GECIS,KONDANSATOR https

5910-27-007-9603 5910270079603 270079603 GECIS,KONDANSATOR

3040-20-007-9603 3040200079603 200079603 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

5340-15-007-9603 5340150079603 150079603 COVER PLATE ACCESS

5950-01-007-9603 5950010079603 010079603 is an item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. it may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. it is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. it may include tuning devices, integral resistors and capacitors; however, excludes filter (as modified). the coil has only two electrical terminals. for items having tapped winding or more than one winding - see transformer, radio frequency. for coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic.