Premium Information is available for this item - Upgrade for $1 a day
5315-00-382-7561
Headless Shoulder Pin
5315003827561 003827561 4019254 4020526 4010796 4020684 5315PL0847185 5315PL1870517
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. View more Headless Shoulder Pin
November 2023
25
Marketplace 5315-00-382-7561
Request a Quotation from participating marketplace vendors
Related Documents 5315-00-382-7561 5+ Documents (More...)
Restrictions 5315-00-382-7561
5315-00-382-7561 is a Headless Shoulder Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5315-00-382-7561
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Poland (WP01)
- Effective Date:
- 1 Aug 2006
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5315-00-382-7561
- Part Number
- Manufacturer
- Status
- 4019254
- Manufacturer
- 32448 - A.W. Mack Manufacturing Co., Inc. (Active)
- Primary Buy
- Primary Buy
- 4019254
- 26198 - Golden Bear Equipment Corp (Active)
- Primary Buy
- Primary Buy
- 4019254
- 97139 - The Slabe Machine Products Llc (Active)
- Primary Buy
- Primary Buy
- 4019254
- 09594 - Newell Window Furnishings Co (Active)
- Primary Buy
- Primary Buy
- 4019254
- 21128 - Jdmc Enterprises Dba High Speed (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 4019254
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4020526
- 00285 - Kwik File Storage Systems Llc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 4010796
- 09594 - Newell Window Furnishings Co (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4020684
- 32448 - A.W. Mack Manufacturing Co., Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4010796
- 01137 - Cecilware Corporation (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 4010796
- 30433 - Trw Inc Vulcan Tools Div (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 4019254
- 11449 - Turbo Power & Marine System Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 4020684
- 02779 - Dempler Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 4010796
- 04861 - Cooper Industries Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 4020684
- 09594 - Newell Window Furnishings Co (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4020526
- 32448 - A.W. Mack Manufacturing Co., Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4020526
- 01137 - Cecilware Corporation (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 4019254
- 04861 - Cooper Industries Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 4020526
- 04861 - Cooper Industries Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 5315PL0847185
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
- 5315PL1870517
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 5315-00-382-7561
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Corner Radius [ALWR]
- 0.020 Inches Nominal
- First End Location [CRDY]
- Both Ends
- First End Style [AAGZ]
- Radius
- Hardness Rating [CQFM]
- 35.0 Rockwell C Minimum Overall And 42.0 Rockwell C Maximum Overall
- Material [MATT]
- Steel Comp 630 Overall
- Material Document And Classification [MDCL]
- Ams 5643 Assn Std Single Material Response Overall
- Second End Relationship With First End [CQBB]
- Identical
- Second Shank Length [CWAS]
- 0.080 Inches Minimum And 0.090 Inches Maximum
- Second Shank Diameter [CQTR]
- 0.0930 Inches Minimum And 0.0935 Inches Maximum
- Shank Diameter [AAZE]
- 0.0930 Inches Minimum And 0.0935 Inches Maximum
- Shank Length [AATR]
- 0.080 Inches Minimum And 0.090 Inches Maximum
- Shoulder Diameter [AAVH]
- 0.185 Inches Minimum And 0.186 Inches Maximum
- Overall Length [ABHP]
- 0.185 Inches Minimum And 0.215 Inches Maximum
- Style Designator [STYL]
- Shoulder
- Surface Finish [CSYM]
- 125.000 Microinches Overall
Weapon Systems (WSDC) 5315-00-382-7561
DLA Procurement Analysis 5315-00-382-7561
- Last Stock Position:
- 126 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-00-382-7561
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NZ
- PRATT & WHITNEY JET ENGINES & COMPONENTS, F-100–P-100
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5315-00-382-7561
Freight Information 5315-00-382-7561
5315-00-382-7561 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 105000. A Sub NMFC of X. It has a NMFC Description of DOWEL PINS I/S NOI IN BAG/BBL/BOXES. 5315-00-382-7561 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 5315-00-382-7561 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 54080 which rates the freight between FCL and LCL. 5315-00-382-7561 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5315-00-382-7561 is not classified as a special type of cargo when transported by water. 5315-00-382-7561 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-00-382-7561
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5315-00-382-7561 3 Records
Contracting Technical Data File (CTDF) 5315-00-382-7561 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: