Premium Information is available for this item - Upgrade for $1 a day
5315-00-283-7798
Headed Straight Pin
5315002837798 002837798 7602467
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC. View more Headed Straight Pin
November 2023
4
Marketplace 5315-00-283-7798
Request a Quotation from participating marketplace vendors
Related Documents 5315-00-283-7798 1+ Documents (More...)
/fsg-59/fsc-5999/us
Restrictions 5315-00-283-7798
5315-00-283-7798 is a Headed Straight Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5315-00-283-7798
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-00-283-7798
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- Poland (WP01)
- Effective Date:
- 1 Jul 2006
Approved Sources 5315-00-283-7798
- Part Number
- Manufacturer
- Status
- 7602467
- Manufacturer
- 93322 - Ge Aviation Systems Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-00-283-7798
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Chamfer Length [AAZP]
- 0.030 Inches Nominal
- Diameter [ABMZ]
- 0.091 Inches Minimum And 0.092 Inches Maximum
- Head Style [AASK]
- Pan No. 2 (R1 Not Required In Item Description)
- Height [HGTH]
- 0.136 Inches Minimum And 0.146 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-S-764,Cond A Fed Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 303 Overall
- Pin Chamfer Angle [CQPJ]
- 45.0 Degrees Nominal
- Pin Head Diameter [CRRG]
- 0.183 Inches Minimum And 0.187 Inches Maximum
- Special Features [FEAT]
- Flatted One Side 0.070 In. To 0.080 In. From Flat To Od,0.365 In. To 0.385 In. Lg To Shank End
- Under Head Length [ABPB]
- 0.781 Inches Minimum And 0.811 Inches Maximum
- Style Designator [STYL]
- Straight
- Surface Finish [CSYM]
- 125.0 Microinches Shoulder End
- Surface Finish [CSYM]
- 63.0 Microinches Outside Diameter
- Surface Treatment Document And Classification [STDC]
- Mil-F-14072,Finish E300 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
Weapon Systems (WSDC) 5315-00-283-7798
DLA Procurement Analysis 5315-00-283-7798
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-00-283-7798
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LN
- FLIGHT LOAD DATA RECORDING SYSTEM EQUIPMENT
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5315-00-283-7798
Freight Information 5315-00-283-7798
5315-00-283-7798 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-00-283-7798 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5315-00-283-7798 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-00-283-7798 is not classified as a special type of cargo when transported by water. 5315-00-283-7798 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5315-00-283-7798 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: