Premium Information is available for this item - Upgrade for $1 a day
5315-00-248-0052
Headless Straight Pin
5315002480052 002480052 23187 WPP3055 M23187 102611-1
A headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD,STRAIGHT,HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN,STRAIGHT,THREADED. View more Headless Straight Pin
August 2023
20
Marketplace 5315-00-248-0052
Request a Quotation from participating marketplace vendors
Related Documents 5315-00-248-0052 5+ Documents (More...)
-112PT23187-257 HV2166B 23187 -257 M23187-112 RNCC 3 RNVC 2 DAC 2 23187-257 K0433 - Trescal Limited (
-132 23187-132R FG02201 B369-182 42277-723-5 42277-723-00-5 CS1027-2 HV2214B A55032-1224 M23187-112
-132 23187-132R FG02201 B369-182 42277-723-5 42277-723-00-5 CS1027-2 HV2214B A55032-1224 M23187-112 M23187
-112PT23187-181J HV2156 23187-181J M23187-112 5325-99-625-2777Nonmetallic Grommet5325996252777 996252777
-257 M23187-112 RNCC 3 RNVC 2 DAC 2 23187-257 K0433 - Trescal Limited (Active) Secondary Buy RNCC 5
-112PT23187-257 HV2166B 23187 -257 M23187-112 RNCC 3 RNVC 2 DAC 2 23187-257 K0433 - Trescal Limited (
-257 M23187-112 RNCC 3 RNVC 2 DAC 2 23187-257 K0433 - Trescal Limited (Active) Secondary Buy RNCC 5
-112PT23187-257 HV2166B 23187 -257 M23187-112 RNCC 3 RNVC 2 DAC 2 23187-257 K0433 - Trescal Limited (
Restrictions 5315-00-248-0052
5315-00-248-0052 is a Headless Straight Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5315-00-248-0052
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-00-248-0052
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 Jul 2003
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5315-00-248-0052
- Part Number
- Manufacturer
- Status
- 23187
- Manufacturer
- 51034 - Fl Industries Inc (Active)
- Primary Buy
- Primary Buy
- 23187
- 08645 - Briggs And Stratton Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- WPP3055
- 79172 - Siemens Water Technologies Corp. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- M23187
- 91340 - Met-Pro Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 102611-1
- 56190 - Metadure Parts & Sales, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 23187
- 89401 - Mid-States Auto Electric (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 23187
- 92441 - Briggs And Stratton Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5315-00-248-0052
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Material [MATT]
- Steel Overall
- First End Style [AAGZ]
- Chamfered
- First End Taper Length [AMCS]
- 0.016 Inches Nominal
- First End Taper Angle [CRMG]
- 45.0 Degrees Nominal
- Second End Relationship With First End [CQBB]
- Identical
- Pin Overall Length [ACHT]
- 0.510 Inches Nominal
- Pin Overall Diameter [ACHU]
- 0.1003 Inches Nominal
DLA Procurement Analysis 5315-00-248-0052
Management Data 5315-00-248-0052
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5315-00-248-0052
Freight Information 5315-00-248-0052
5315-00-248-0052 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 105000. A Sub NMFC of X. It has a NMFC Description of DOWEL PINS I/S NOI IN BAG/BBL/BOXES. 5315-00-248-0052 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54080 which rates the freight between FCL and LCL. 5315-00-248-0052 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-00-248-0052 is not classified as a special type of cargo when transported by water. 5315-00-248-0052 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-00-248-0052
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5315-00-248-0052 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: