Premium Information is available for this item - Upgrade for $1 a day
5315-00-237-3034
Headless Straight Pin
5315002373034 002373034 SAE-AS20253 MS20253-5-258
A headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD,STRAIGHT,HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN,STRAIGHT,THREADED. View more Headless Straight Pin
November 2023
6
Marketplace 5315-00-237-3034
Request a Quotation from participating marketplace vendors
Related Documents 5315-00-237-3034 5+ Documents (More...)
a day Upgrade your Account Upgrade 5315-01-327-2136Headless Straight Rod5315013272136 013272136 SAE-AS20253
a day Upgrade your Account Upgrade 5315-00-521-4865Headless Straight Pin5315005214865 005214865 SAE-AS20253
a day Upgrade your Account Upgrade 5315-01-359-6640Headless Straight Rod5315013596640 013596640 SAE-AS20253
a day Upgrade your Account Upgrade 5315-01-327-2136Headless Straight Rod5315013272136 013272136 SAE-AS20253
a day Upgrade your Account Upgrade 5315-01-369-4153Headless Straight Pin5315013694153 013694153 SAE-AS20253
a day Upgrade your Account Upgrade 5315-01-327-2136Headless Straight Rod5315013272136 013272136 SAE-AS20253
a day Upgrade your Account Upgrade 5315-01-369-4153Headless Straight Pin5315013694153 013694153 SAE-AS20253
a day Upgrade your Account Upgrade 5315-01-327-2136Headless Straight Rod5315013272136 013272136 SAE-AS20253
a day Upgrade your Account Upgrade 5315-01-369-4153Headless Straight Pin5315013694153 013694153 SAE-AS20253
a day Upgrade your Account Upgrade 5315-01-327-2136Headless Straight Rod5315013272136 013272136 SAE-AS20253
Restrictions 5315-00-237-3034
5315-00-237-3034 is a Headless Straight Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5315-00-237-3034
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-00-237-3034
- US Air Force (F3GI)
- Effective Date:
- 1 Jan 2011
- Former MOE Rule:
- FUGI
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5315-00-237-3034
- Part Number
- Manufacturer
- Status
- SAE-AS20253
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- MS20253-5-258
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- MS20253-5-258
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5315-00-237-3034
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 45.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.015 Inches Nominal
- Material [MATT]
- Steel Comp 316 Overall
- Material Document And Classification [MDCL]
- Form 1,Cond B Assn Std Single Material Response Overall
- Second End Relationship With First End [CQBB]
- Identical
- Pin Overall Diameter [ACHU]
- 0.1290 Inches Minimum And 0.1300 Inches Maximum
- Pin Overall Length [ACHT]
- 2.565 Inches Minimum And 2.595 Inches Maximum
- Surface Treatment [SFTT]
- Passivate Overall
DLA Procurement Analysis 5315-00-237-3034
Management Data 5315-00-237-3034
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- XW
- FMS UNIQUE/SA-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5315-00-237-3034
Freight Information 5315-00-237-3034
5315-00-237-3034 has freight characteristics managed by Germany.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-00-237-3034 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5315-00-237-3034 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-00-237-3034 is not classified as a special type of cargo when transported by water. 5315-00-237-3034 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5315-00-237-3034 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: