Premium Information is available for this item - Upgrade for $1 a day
5315-00-172-5278
Hollow Pin
5315001725278 001725278 411R390H01
A cylindrically-shaped headless item, having a straight smooth body and a hole through the longitudinal center. Its length must not exceed five times its diameter or 12 inches (304 mm), whichever is greater. Excludes BEARING, SLEEVE; and PIN, PISTON. View more Hollow Pin
May 2023
7
Marketplace 5315-00-172-5278
Request a Quotation from participating marketplace vendors
Related Documents 5315-00-172-5278 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5315-00-172-5278 RQST NE Updated Every Day 5315-00-172-5278 RQST
Updated Every Day 5315-00-172-5278 RQST NE Related Documents 5315-00-172-5278 1+ Documents ( More...
Restrictions 5315-00-172-5278
5315-00-172-5278 is a Hollow Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5315-00-172-5278
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-00-172-5278
- US Air Force (F3GI)
- Effective Date:
- 1 Jan 2011
- Former MOE Rule:
- FUGI
Approved Sources 5315-00-172-5278
- Part Number
- Manufacturer
- Status
- 411R390H01
- Manufacturer
- 97942 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-00-172-5278
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 30.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.090 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Overall
- Material [MATT]
- Steel Corrosion Resisting Overall
- Inside Diameter [AARX]
- 0.373 Inches Minimum And 0.380 Inches Maximum
- Second End Relationship With First End [CQBB]
- Not Identical
- Second End Style [AAHP]
- Chamfered
- Second End Taper Angle [CTHC]
- 15.0 Degrees Nominal
- Second End Taper Length [AMFM]
- 0.230 Inches Nominal
- Pin Overall Length [ACHT]
- 2.480 Inches Nominal
- Pin Overall Diameter [ACHU]
- 0.7500 Inches Nominal
- Surface Treatment Document And Classification [STDC]
- Qq-P-35,Ty 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
DLA Procurement Analysis 5315-00-172-5278
Management Data 5315-00-172-5278
Similar Supply Items to 5315-00-172-5278
Freight Information 5315-00-172-5278
5315-00-172-5278 has freight characteristics managed by Germany.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-00-172-5278 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5315-00-172-5278 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-00-172-5278 is not classified as a special type of cargo when transported by water. 5315-00-172-5278 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5315-00-172-5278 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: