Premium Information is available for this item - Upgrade for $1 a day
5315-00-127-3969
Headless Shoulder Pin
5315001273969 001273969 67491-301-1
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. View more Headless Shoulder Pin
November 2023
3
Marketplace 5315-00-127-3969
Request a Quotation from participating marketplace vendors
Related Documents 5315-00-127-3969 2+ Documents (More...)
Restrictions 5315-00-127-3969
5315-00-127-3969 is a Headless Shoulder Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5315-00-127-3969
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5315-00-127-3969
- US Air Force (FUGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FUKZ
Approved Sources 5315-00-127-3969
- Part Number
- Manufacturer
- Status
- 67491-301-1
- Manufacturer
- 94756 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- 67491-301-1
- 9U449 - Loveridge Machine & Tool Inc (Active)
- Secondary Buy
- Secondary Buy
- 67491-301-1
- 22625 - Martin-Chandler Inc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5315-00-127-3969
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 45.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.320 Inches Nominal
- First End Location [CRDY]
- Both Ends
- Material Document And Classification [MDCL]
- Qq-S-763 Cond A Fed Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 303Se Overall
- Second End Relationship With First End [CQBB]
- Identical
- Shank Diameter [AAZE]
- 0.185 Inches Minimum And 0.189 Inches Maximum
- Shank Length [AATR]
- 0.437 Inches Nominal
- Shoulder Diameter [AAVH]
- 0.2493 Inches Minimum And 0.2495 Inches Maximum
- Overall Length [ABHP]
- 0.687 Inches Nominal
- Special Features [FEAT]
- Shank Is Eccentric To Shoulder; Centerline Of 0.031 In. W X 0.033 In. Dp Slot In End Of Shank Even W/Center Of 0.062 In. W X 0.188 In. Lg Circular Groove In Shoulder
- Style Designator [STYL]
- Shoulder
Weapon Systems (WSDC) 5315-00-127-3969
DLA Procurement Analysis 5315-00-127-3969
- Last Stock Position:
- 103 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5315-00-127-3969
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- AH
- LGM-30 MINUTEMAN
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5315-00-127-3969
Freight Information 5315-00-127-3969
5315-00-127-3969 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 105840. A Sub NMFC of X. It has a NMFC Description of NAILS/SPIKES I/S NOI PLAIN ETC. 5315-00-127-3969 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54430 which rates the freight between FCL and LCL. 5315-00-127-3969 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 575 for ocean manifesting and military sealift. 5315-00-127-3969 is not classified as a special type of cargo when transported by water. 5315-00-127-3969 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-00-127-3969
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5315-00-127-3969 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: