Premium Information is available for this item - Upgrade for $1 a day
5315-00-053-1268
Headless Shoulder Pin
5315000531268 000531268 8626247
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. View more Headless Shoulder Pin
August 2023
3
Marketplace 5315-00-053-1268
Request a Quotation from participating marketplace vendors
Related Documents 5315-00-053-1268 2+ Documents (More...)
Restrictions 5315-00-053-1268
5315-00-053-1268 is a Headless Shoulder Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5315-00-053-1268
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- BF
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
Approved Sources 5315-00-053-1268
- Part Number
- Manufacturer
- Status
- 8626247
- Manufacturer
- 19200 - Combat Capabilities Development (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-00-053-1268
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Location [CRDY]
- Shank End
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 60.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.094 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-T-580 Fed Spec Single Material Response Overall
- Material [MATT]
- Steel Comp W110 Overall
- Nominal Thread Size [CQJX]
- 0.190 Inches
- Internal Drive Style [ABQZ]
- Slot
- Second End Relationship With First End [CQBB]
- Not Identical
- Second End Slot Depth [AMGR]
- 0.060 Inches Minimum And 0.070 Inches Maximum
- Second End Slot Width [AKTN]
- 0.030 Inches Minimum And 0.040 Inches Maximum
- Second End Style [AAHP]
- Slotted
- Shank Length [AATR]
- 0.343 Inches Minimum
- Shank Diameter [AAZE]
- 0.1402 Inches Minimum And 0.1405 Inches Maximum
- Shoulder Diameter [AAVH]
- 0.190 Inches Nominal
- Overall Length [ABHP]
- 0.552 Inches Minimum And 0.562 Inches Maximum
- Style Designator [STYL]
- Shoulder
- Surface Finish [CSYM]
- 63.000 Microinches Large Shank
- Surface Treatment Document And Classification [STDC]
- Mil-C-13924 Cl 2 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Oxide Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.219 Inches Nominal
- Thread Series Designator [THSD]
- Unc
Weapon Systems (WSDC) 5315-00-053-1268
DLA Procurement Analysis 5315-00-053-1268
Management Data 5315-00-053-1268
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5315-00-053-1268
Freight Information 5315-00-053-1268
5315-00-053-1268 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-00-053-1268 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-00-053-1268 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-00-053-1268 is not classified as a special type of cargo when transported by water. 5315-00-053-1268 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-00-053-1268
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5315-00-053-1268 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: