5315-99-601-7750

Documents 5315-99-700-0129 3+ Documents (More... ) https//www.nsnlookup.com /fsg-53/fsc-5315/uk 5315-99-601-7750
Hollow Pin 5315996017750 996017750,UBS 41-C 5315-99-601-7750 5315996017750 996017750 is a cylindrically-shaped

5315-99-700-0130 5315997000130 997000130 is a cylindrically-shaped headless item, having a straight smooth body and a hole through the longitudinal center. its length must not exceed five times its diameter or 12 inches (304 mm), whichever is greater. excludes bearing, sleeve; and pin, piston.

5315-00-452-6739 5315004526739 004526739 PIN HOLLOW

5315-99-700-0131 5315997000131 997000131 is a cylindrically-shaped headless item, having a straight smooth body and a hole through the longitudinal center. its length must not exceed five times its diameter or 12 inches (304 mm), whichever is greater. excludes bearing, sleeve; and pin, piston.

5310-99-449-3267 5310994493267 994493267 is an internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.