5315-15-004-0438

see also switch (as modified); and controller. https//www.nsnlookup.com /fsg-53/fsc-5315/it 5315-15-004-0438
Perno Di Bloccaggio 5315150040438 150040438 5315-15-004-0438 5315150040438 150040438 PERNO DI BLOCCAGGIO

9471Bre Ersatzteilsatz2530121469471 121469471 5077 298 063 5077298063 2.9801-9909.2 2980199092 2360-120048
Kg (Active) Primary Buy RNCC 3 RNVC 2 DAC 6 2360-120048-00-0 D1871 - Krauss-Maffei Wegmann Gmbh & Co.
2 DAC 6 5077298063 D8124 - Zf Friedrichshafen Ag (Active) Secondary Buy RNCC 5 RNVC 2 DAC 5 2360-120048

5306-14-552-6344 5306145526344 145526344 is an externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Details... 12004-8 DRIVER ASSEMBLY 8 EA NS Request Quotation Subscribe to View Vendor Details... 120048

5305-14-414-6972 5305144146972 144146972 is an externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.