5315-14-410-5475

5340-01-144-0114 5340011440114 011440114 is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. it usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. it may have accommodations for locking and/or positioning. the point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link,rigid; wire rope assembly,single leg; and clevis,rod end; and the like. excludes arm (as modified); lever,remote control; and bell crank.

2520-15-144-0114 2520151440114 151440114 SOFFIETTO CILINDRO

6145-25-144-0114 6145251440114 251440114 is two or more insulated conductors (solid or stranded) contained in a common covering, or two or more insulated conductors twisted or molded together without a common covering, or one insulated conductor with a metallic covering, covering, shield, or outer conductor. the rated working voltage of the item must be 300 volts or more, or in lieu of this the test voltage must be 1,000 volts or more; and the size of each individual conductor must be number 18 american wire gage (0.75 square millimeters) or larger. for cables with uninsulated neutral conductor use the hightest rated voltage. refers to bulk quantities only, for items of definite length with processed ends or terminated in fittings, see cable assembly, power, electrical. for low voltage aircraft and automotive cable, see cable, special purpose, electrical.

4730-12-144-0114 4730121440114 121440114 is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. it is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. for square, rectangular, or irregularly shaped items, see clamp, hose, special-shaped. excludes clamp, electrical; clamp, loop; clamp, fire hose, shutoff; ferrule (as modified); and hand screw.

6145-00-144-0114 6145001440114 001440114 is a single metallic conductor of solid, stranded, or tinsel construction, designed to carry current in an electrical circuit. it may be a bare or insulated, may have metalic covering sheath, shield or and additional jacket. refers to bulk quantities only. for items that are solid or stranded, insulated or uninsulated, and have the chemical composition specified but no conductivity (electrical properties) see wire,(as modified), includes litz wire and insulated/uninsulated armored, and ground wire. excludes braid, wire; fuse wire; resistance wire and magnet wire.