5315-14-354-8074

4730-00-900-0484 4730009000484 009000484 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. it may have side or heel inlet(s). see also elbow, tube; and connector, multiple, fluid pressure line. excludes bend, soil pipe.

5330-99-524-8479 5330995248479 995248479 is a deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

4730-00-900-0485 4730009000485 009000485 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. it may have side or heel inlet(s). see also elbow, tube; and connector, multiple, fluid pressure line. excludes bend, soil pipe.

5365-14-423-5355 5365144235355 144235355 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

8145-01-545-6993 8145015456993 015456993 is a reusable item of any configuration designed to enclose any of a variety of item(s) to protect them against impact, vibration, climatic conditions and the like, during transport and storage. do not use if a more specific name applies.