5315-33-109-2277
Cotter Pin
5315331092277 331092277 DIN 94/ D3,2X71 /AC /F 2 4540 00 1340 B-4-12 6916-535
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place. View more Cotter Pin
Managed by Spain
NSN Created on 3 Oct 1995
Data Last Changed
July 2023
July 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5315-33-109-2277
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5315-33-109-2277 5+ Documents (More...)
5305-01-700-1459 5305017001459 017001459 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
5305-01-706-5519 5305017065519 017065519 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
1430-00-956-4698 1430009564698 009564698 SPACER,SLEEVE
5365-00-825-2520 5365008252520 008252520 SPACER,SLEEVE
5365-01-067-8870 5365010678870 010678870 SPACER,SLEEVE
Restrictions 5315-33-109-2277
Approved Sources 5315-33-109-2277
- Part Number
- Manufacturer
- Status
- 2 4540 00 1340
- Manufacturer
- 0124B - Sapa Operaciones Sl (Active)
- Primary Buy
- Primary Buy
- B-4-12
- 0124B - Sapa Operaciones Sl (Active)
- Primary Buy
- Primary Buy
- DIN 94/ D3,2X71 /AC /F
- 0124B - Sapa Operaciones Sl (Active)
- Incomplete Standard
- Incomplete Standard
- 6916-535
- 0124B - Sapa Operaciones Sl (Active)
- Secondary Buy
- Secondary Buy
NATO Stock Numbers Related to 5315-33-109-2277
5315-99-127-8053 5315-14-559-8871 5315-27-015-8498 5315-34-030-5147 5315-27-052-1591 5315-34-041-5458 5315-99-747-6160 5315-99-727-3555 5315-32-020-9644 2805-22-256-5016 5315-19-004-3934 5315-99-460-8439 5315-66-155-9357 5315-12-341-6630 5315-12-700-2686 5315-27-015-7428 5315-12-173-6583 5315-16-002-1706