Premium Information is available for this item - Upgrade for $1 a day
5310-01-696-1028
Flat Washer
5310016961028 016961028 70199713 REV H SHT 5 70199713-1 70199713-1 70199713 REV H
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-696-1028
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-696-1028 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-696-1028 RQST NE Updated Every Day 5310-01-696-1028 RQST
) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-696-1028 Flat Washer 5310016961028016961028 70199713
P/N 70199713-19 70199713 REV H SHT 67 70199713-19 70199713 A ramp which is used for loading cargo
SHT 6 70199713-9 70199713 -9 70199713 REV H SHT 6 70199713 REV H SHT 6 70199713-9 70199713 A ramp
Flat Washer 5310016961028 016961028 SHT 5 70199713-1 70199713-1 70199713 REV H A washer having
a centrally located hole with a solid P/N 70199713-9 70199713 REV H SHT 6 70199713-9 70199713 A ramp
/fsg-53/fsc-5365/us
SHT 6 FIND NO. 19 70199722-2 70199713 REV H A tubular shaped unthreaded item with or without a
/www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-696-1019 Sleeve Bushing 5365016961019016961019 70199713 REV H
A deformable material which prevents the passage of P/N 70199713-9 70199713 REV H SHT 6 70199713
Flat Washer 5310016961028 016961028 SHT 5 70199713-1 70199713-1 70199713 REV H A washer having
Restrictions 5310-01-696-1028
5310-01-696-1028 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Approved Sources 5310-01-696-1028
- Part Number
- Manufacturer
- Status
- 70199713-1
- Manufacturer
- 38597 - Lockheed Martin Corporation (Active)
- Primary Buy
- Primary Buy
- 70199713 REV H SHT 5 70199713-1
- 38597 - Lockheed Martin Corporation (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 70199713 REV H
- 38597 - Lockheed Martin Corporation (Active)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 5310-01-696-1028
Management Data 5310-01-696-1028
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-696-1028
Contracting Technical Data File (CTDF) 5310-01-696-1028 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: