Premium Information is available for this item - Upgrade for $1 a day
5310-01-690-5173
Flat Washer
5310016905173 016905173 V2C13523-1 V1E10416 ITEM 76 V1E10416
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-690-5173
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-690-5173 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-690-5173 RQST NE Updated Every Day 5310-01-690-5173 RQST
RQST NE Updated Every Day 5310-01-690-5173 RQST Updated Every Day 5310-01-690-5173 RQST NE Related
ITEM 41 V1E10416 A gear, cylindrical in form, with straight teeth on the outer surface -41 V1E10416
ITEM 41 V1E10416 A gear, cylindrical in form, with ITEM 41 V1E10416 A gear, cylindrical in form, with
A gear, cylindrical in form, with straight teeth on the outer surface -41 V1E10416 ITEM 41 V1E10416 A
-41 V1E10416 ITEM 41 V1E10416 A gear, cylindrical in form, with straight teeth on the outer surface
A gear, cylindrical in form, with straight teeth on the outer surface -41 V1E10416 ITEM 41 V1E10416
/fsg-53/fsc-5310/us 5310-01-690-5173 Flat Washer 5310016905173 016905173 ITEM 76 V1E10416 A washer having
/fsg-53/fsc-5325/us
Flat Washer 5310016905173 016905173 -41 V1E10416 ITEM 41 V1E10416 A gear, cylindrical in form,
with straight teeth on the outer surface -41 V1E10416 ITEM 41 V1E10416 A gear, cylindrical in form, with
Restrictions 5310-01-690-5173
5310-01-690-5173 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-690-5173
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
Approved Sources 5310-01-690-5173
- Part Number
- Manufacturer
- Status
- V2C13523-1
- Manufacturer
- 99517 - Vacco Industries (Active)
- Primary Buy
- Primary Buy
- V1E10416 ITEM 76
- 99517 - Vacco Industries (Active)
- Secondary Buy
- Secondary Buy
- V1E10416
- 99517 - Vacco Industries (Active)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 5310-01-690-5173
Management Data 5310-01-690-5173
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg