Premium Information is available for this item - Upgrade for $1 a day
5310-01-685-7750
Flat Washer
5310016857750 016857750 3000064-29 3000064
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-685-7750
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-685-7750 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-685-7750 RQST NE Updated Every Day 5310-01-685-7750 RQST
Updated Every Day 5310-01-685-7750 RQST NE Related Documents 5310-01-685-7750 5+ Documents ( More...
how to enable JavaScript in your web browser . 4820-15-004 -7234Plug Bleeder4820150047234 150047234 3000064
how to enable JavaScript in your web browser . 4820-15-004 -7234Plug Bleeder4820150047234 150047234 3000064
how to enable JavaScript in your web browser . 4820-15-004-7234Plug Bleeder4820150047234 150047234 3000064
5310/us 5310-01-580-5067 Flat Washer 5310015805067 015805067,3000064-5 -5 50N100WFLLM-134 4292204 3000064
Flat Washer 5310016857750 016857750 -29 3000064 A washer having a centrally located hole with a
-30 3000064 A washer having a centrally located hole with a solid or laminated cross-section and two
-30 3000064 A washer having a centrally located hole with a solid or laminated cross-section and two
Flat Washer 5310016857750 016857750 -29 3000064 A washer having a centrally located hole with a
Restrictions 5310-01-685-7750
5310-01-685-7750 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-685-7750
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
Approved Sources 5310-01-685-7750
- Part Number
- Manufacturer
- Status
- 3000064-29
- Manufacturer
- 80212 - Bae Systems Land & Armaments L.P. (Active)
- Primary Buy
- Primary Buy
- 3000064
- 80212 - Bae Systems Land & Armaments L.P. (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-685-7750
DLA Procurement Analysis 5310-01-685-7750
Management Data 5310-01-685-7750
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-01-685-7750
Contracting Technical Data File (CTDF) 5310-01-685-7750 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- W
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: