Premium Information is available for this item - Upgrade for $1 a day
5310-01-685-6989
Flat Washer
5310016856989 016856989 3001066-140N 300106
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
![5310-01-685-6989 WASHER,FLAT 5310016856989 016856989 1/1 5310-01-685-6989 WASHER,FLAT 5310016856989 016856989 1/1](https://image.nsnlookup.com/fsc/300/5310.webp)
Marketplace 5310-01-685-6989
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-685-6989 5+ Documents (More...)
in your web browser . 5330-14-498-7577Gasket5330144987577 144987577 NO PRIMARY REF14-498-7577 32-300106
day Upgrade your Account Upgrade 5310-01-685-6989Flat Washer5310016856989 016856989 3001066-140N 300106
day Upgrade your Account Upgrade 5310-01-685-6989Flat Washer5310016856989 016856989 3001066-140N 300106
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-685-6989 Flat Washer 5310016856989 016856989 day
day Upgrade your Account Upgrade 5315-01-365-7482Headless Straight Pin5315013657482 013657482 155-300106
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-685-6989 Flat Washer 5310016856989 016856989 day
enable JavaScript in your web browser . 4510-21-902-3790Faucet Centerpiece4510219023790 219023790 300106
in your web browser . 5330-14-498-7577Gasket5330144987577 144987577 NO PRIMARY REF14-498-7577 32-300106
in your web browser . 5330-14-498-7577Gasket5330144987577 144987577 NO PRIMARY REF14-498-7577 32-300106
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-685-6989 Flat Washer 5310016856989 016856989 day
Restrictions 5310-01-685-6989
5310-01-685-6989 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-685-6989
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
Approved Sources 5310-01-685-6989
- Part Number
- Manufacturer
- Status
- 3001066-140N
- Manufacturer
- 80212 - Bae Systems Land & Armaments L.P. (Active)
- Primary Buy
- Primary Buy
- 300106
- 80212 - Bae Systems Land & Armaments L.P. (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-685-6989
DLA Procurement Analysis 5310-01-685-6989
Management Data 5310-01-685-6989
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-01-685-6989
Contracting Technical Data File (CTDF) 5310-01-685-6989 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- W
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: