Premium Information is available for this item - Upgrade for $1 a day
5310-01-674-7031
Flat Washer
5310016747031 016747031 B18.24 AEW26X25W000EA1A91
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-674-7031
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-674-7031 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-674-7031 (Identification) 2/3 NSN 5310-01-674-7031 (Identification
BUY NE FedMall Updated Every Day 5310-01-674-7031 RQST NE Updated Every Day 5310-01-674-7031 RQST
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-679-1553 Lock Washer 5310016791553 016791553,B18.24
for $1 a day Upgrade your Account Upgrade 5315-01-525-0127Cotter Pin5315015250127 015250127 ASME B18.24
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-674-5623 Lock Washer 5310016745623 016745623,B18.24
for $1 a day Upgrade your Account Upgrade 5315-01-525-0127Cotter Pin5315015250127 015250127 ASME B18.24
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-674-5623 Lock Washer 5310016745623 016745623,B18.24
for $1 a day Upgrade your Account Upgrade 5315-01-525-0127Cotter Pin5315015250127 015250127 ASME B18.24
2015 day Upgrade your Account Upgrade 5310-01-688-0988Hexagon Plain Nut5310016880988 016880988 ASME B18.24
for $1 a day Upgrade your Account Upgrade 5310-01-697-5453Flat Washer5310016975453 016975453 ASME B18.24
Restrictions 5310-01-674-7031
5310-01-674-7031 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-674-7031
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
Approved Sources 5310-01-674-7031
- Part Number
- Manufacturer
- Status
- B18.24
- Manufacturer
- 05047 - The American Society Of Mechanical (Active)
- Incomplete Reference
- Incomplete Reference
- AEW26X25W000EA1A91
- 05047 - The American Society Of Mechanical (Active)
- Primary Buy
- Primary Buy
DLA Procurement Analysis 5310-01-674-7031
Management Data 5310-01-674-7031
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5310-01-674-7031
Contracting Technical Data File (CTDF) 5310-01-674-7031 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: