5310-01-667-4785

valve, graphite impregnated and lubricated items. https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-667-4785
Spring Tension Washer 5310016674785 016674785 5310-01-667-4785 5310016674785 016674785 is a bent

5310-14-544-1402 5310145441402 145441402 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5307-14-226-6333 5307142266333 142266333 is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.

DAC: 4 10 May 2016 4730-01-654-8031 Tube Elbow 27-32004RNCC: 3 | RNVC: 2 | DAC: 4 10 May 2016 5310-01-667-4785