Premium Information is available for this item - Upgrade for $1 a day
5310-01-664-2662
Flat Washer
5310016642662 016642662 114G1025-7 114G1025
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-664-2662
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-664-2662 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-664-2662 RQST NE Updated Every Day 5310-01-664-2662 RQST
Updated Every Day 5310-01-664-2662 RQST NE Related Documents 5310-01-664-2662 5+ Documents ( More...
Flat Washer 5310016642662 016642662 Documents 5310-01-664-2662 2+ Documents ( More... ) https//
Upgrade for $1 a day Upgrade your Account Upgrade 5340-01-664 -5363Handle Grip5340016645363 016645363 114G1025
www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-665-0438 Flexible Drive Shaft 3040016650438016650438 114G1025
Flat Washer 5310016642662 016642662 5363Handle Grip5340016645363 016645363 114G1025 https//www.nsnlookup.com
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-664-3073 Flat Washer 5310016643073016643073 114G1025
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 114G1025
2055 SHIELD,AIRCRAFT GROUND SERVICING RQST NS Request Quotation Subscribe to View Vendor Details... 114G1025
Restrictions 5310-01-664-2662
5310-01-664-2662 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-664-2662
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
Approved Sources 5310-01-664-2662
- Part Number
- Manufacturer
- Status
- 114G1025-7
- Manufacturer
- 77272 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- 114G1025
- 77272 - The Boeing Company (Active)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 5310-01-664-2662
Management Data 5310-01-664-2662
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5310-01-664-2662
Contracting Technical Data File (CTDF) 5310-01-664-2662 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: