Premium Information is available for this item - Upgrade for $1 a day
5310-01-659-3036
Flat Washer
5310016593036 016593036 130009-193-1 130009-193
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
1
Marketplace 5310-01-659-3036
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-659-3036 3+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-659-3036 RQST NE Updated Every Day 5310-01-659-3036 RQST
Updated Every Day 5310-01-659-3036 RQST NE Related Documents 5310-01-659-3036 3+ Documents ( More...
Flat Washer 5310016593036 016593036 Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-659
-3036Flat Washer5310016593036 016593036 130009 -193-1 130009-193 A washer having a centrally located
/fsg-53/fsc-5325/us
Flat Washer 5310016593036 016593036 Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-659
-3036Flat Washer5310016593036 016593036 130009 -193-1 130009-193 A washer having a centrally located
Restrictions 5310-01-659-3036
5310-01-659-3036 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-659-3036
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-659-3036
- US Air Force (FGGI)
- Effective Date:
- 1 Nov 2016
Approved Sources 5310-01-659-3036
- Part Number
- Manufacturer
- Status
- 130009-193-1
- Manufacturer
- 56529 - Hydraulics International, Inc. (Active)
- Primary Buy
- Primary Buy
- 130009-193
- 56529 - Hydraulics International, Inc. (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-659-3036
DLA Procurement Analysis 5310-01-659-3036
- Last Stock Position:
- 8 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-659-3036
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- RN
- GROUND SUPPORT EQUIPMENT (FSC RESIDUAL MMAC)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5310-01-659-3036
Freight Information 5310-01-659-3036
5310-01-659-3036 has freight characteristics managed by the General Services Administration (GSA).. 5310-01-659-3036 has a variance between NMFC and UFC when transported by rail and the description should be consulted.
Procurement History 5310-01-659-3036 1 Records
Contracting Technical Data File (CTDF) 5310-01-659-3036 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: