Premium Information is available for this item - Upgrade for $1 a day
5310-01-658-7619
Flat Washer
5310016587619 016587619 15101350-5 15101350 REV C FIND NO 5 15101350
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-658-7619
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-658-7619 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-658-7619 RQST NE Updated Every Day 5310-01-658-7619 RQST
) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-658-7619 Flat Washer 5310016587619016587619 15101350
Light Emitting Diode 5980123759892123759892 -1 15101350 A drive shaft https//www.nsnlookup.com Light
Emitting Diode 5980123759892123759892 REV C FIND NO.1 15101350 REV C FIND NO.1 15101350- https//www.nsnlookup.com
REV C FIND NO.1 15101350-1 15101350 A drive shaft with external https//www.nsnlookup.com /fsg-30/fsc
REV C FIND NO.1 15101350-1 15101350 A drive shaft with external thread(s) and with machined Mortise
REV C FIND NO.1 15101350-1 15101350 A drive shaft with external thread(s) and with machined
REV C FIND NO.1 15101350-115101350 A drive shaft with external https//www.nsnlookup.com /fsg-30/fsc
REV C FIND NO.3 15101350-3 A circular-shaped item designed to maintain predetermined distance between
https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-659-5346 Ring Spacer 5365016595346016595346 15101350
Restrictions 5310-01-658-7619
5310-01-658-7619 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-658-7619
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-658-7619
- US Navy (N9BZ)
- Effective Date:
- 1 Oct 2016
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-658-7619
- Part Number
- Manufacturer
- Status
- 15101350-5
- Manufacturer
- 38597 - Lockheed Martin Corporation (Active)
- Primary Buy
- Primary Buy
- 15101350 REV C FIND NO 5
- 38597 - Lockheed Martin Corporation (Active)
- Secondary Buy
- Secondary Buy
- 15101350
- 38597 - Lockheed Martin Corporation (Active)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 5310-01-658-7619
Management Data 5310-01-658-7619
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-658-7619
Freight Information 5310-01-658-7619
5310-01-658-7619 has freight characteristics managed by the Food and Drug Administration (FDA).. 5310-01-658-7619 has a variance between NMFC and UFC when transported by rail and the description should be consulted.
Contracting Technical Data File (CTDF) 5310-01-658-7619 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: