Premium Information is available for this item - Upgrade for $1 a day
5310-01-656-4897
Flat Washer
5310016564897 016564897 362-007
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-656-4897
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-656-4897 5+ Documents (More...)
Flat Washer 5310016564897 016564897,362-007 5310-01-656-4897 5310016564897 016564897 is a washer
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 362-007
NumberManufacturerStatusFGA625-5 72433 - Flexitallic Gasket Co Inc (Replaced) Original Design RNCC 3 RNVC 9 DAC 5 362-007
Code Subscribe to View HTS Code Approved Sources 2935-01-677-6129 Part NumberManufacturerStatus407-362-007
Restrictions 5310-01-656-4897
5310-01-656-4897 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-656-4897
- US Air Force (FBB5)
- Effective Date:
- 1 Jul 2016
Approved Sources 5310-01-656-4897
- Part Number
- Manufacturer
- Status
- 362-007
- Manufacturer
- 94861 - Malabar (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-656-4897
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- End Item Identification [AGAV]
- Kc-46A Support Equipment
- Part Name Assigned By Controlling Agency [CXCY]
- Flat Washer, 3/4 Sae
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 0.750 Inches Nominal
DLA Procurement Analysis 5310-01-656-4897
Management Data 5310-01-656-4897
Air Force
- Budget:
- S
- 57X3010 - Aircraft Replenishment Spares
- Aggregation Code:
- TK
- KC-46 TANKER
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-656-4897
Freight Information 5310-01-656-4897
5310-01-656-4897 has freight characteristics.. 5310-01-656-4897 has a variance between NMFC and UFC when transported by rail and the description should be consulted.