Premium Information is available for this item - Upgrade for $1 a day
5310-01-646-6469
Flat Washer
5310016466469 016466469 5387 4219074
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
2
Marketplace 5310-01-646-6469
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5310-01-646-6469 4+ Documents (More...)
NE FedMall Updated Every Day 5310-01-646-6469 RQST NE Updated Every Day 5310-01-646-6469 RQST Updated
Every Day 5310-01-646-6469 RQST NE Related Documents 5310-01-646-6469 4+ Documents ( More... ) https
6469Flat Washer5310016466469 016466469 5387 4219074 Shaft Eye Bracket3040016460132 01646013257934219074
Flat Washer 5310016466469 016466469,5387 for $1 RNCC 3 RNVC 2 DAC 5 5793 066R1 - Irobot Corporation
for $1 a day Upgrade your Account Upgrade 5310-01-646-6469Flat Washer5310016466469 016466469 5387 4219074
Flat Washer 5310016466469 016466469,5387 for $1 a day Upgrade your Account Upgrade 5310-01-646-
Upgrade your Account Upgrade 3040-01-646-0132Nonrotating Shaft Eye Bracket3040016460132 0164601325793 4219074
for $1 a day Upgrade your Account Upgrade 5310-01-646-6453Flat Washer5310016466453 016466453 7067 4219074
Restrictions 5310-01-646-6469
5310-01-646-6469 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-646-6469
- US Marine Corps (MC47)
- Effective Date:
- 1 Jul 2015
Approved Sources 5310-01-646-6469
- Part Number
- Manufacturer
- Status
- 5387
- Manufacturer
- 7KJ69 - Teledyne Flir Unmanned Ground (Active)
- Primary Buy
- Primary Buy
- 5387
- 066R1 - Irobot Corporation (Active)
- Original Design
- Original Design
- 4219074
- 066R1 - Irobot Corporation (Active)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 5310-01-646-6469
Management Data 5310-01-646-6469
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-01-646-6469
Freight Information 5310-01-646-6469
5310-01-646-6469 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-646-6469 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-646-6469 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-646-6469 is not classified as a special type of cargo when transported by water. 5310-01-646-6469 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-646-6469 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: