Premium Information is available for this item - Upgrade for $1 a day
5310-01-641-6072
Flat Washer
5310016416072 016416072 J2655FAW0750C2 167-8396979 ITEM 24 167-8396979
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
June 2023
3
Marketplace 5310-01-641-6072
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-641-6072 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-641-6072 (Identification) 2/3 NSN 5310-01-641-6072 (Identification
BUY NE FedMall Updated Every Day 5310-01-641-6072 RQST NE Updated Every Day 5310-01-641-6072 RQST
/fsg-31/fsc-3120/us
Flat Washer 5310016416072 016416072 RQST NE Updated Every Day 5310-01-641-6072 RQST https//www.nsnlookup.com
for $1 a day Upgrade your Account Upgrade 3120-01-641-6949Sleeve Bearing3120016416949 016416949 167-8396979
www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-640-8345 Mechanically Actuated Spindle 3040016408345 167-8396979
Flat Washer 5310016416072 016416072 8396979 https//www.nsnlookup.com /fsg-31/fsc-3120 https//www.nsnlookup.com
/fsg-31/fsc-3120/us
https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-640-9656 Sleeve Bearing 3120016409656016409656 167-8396979
7423 Headed Straight Pin 5315016417423 016417423 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-641-6072
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-640-8196 Flat Washer 5310016408196016408196 167-8396979
RQST NE Updated Every Day 5310-01-640-8196 RQST https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-641-6072
Restrictions 5310-01-641-6072
5310-01-641-6072 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-641-6072
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-641-6072
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2015
- Supplementary Collaborators:
- HDJB
Approved Sources 5310-01-641-6072
- Part Number
- Manufacturer
- Status
- J2655FAW0750C2
- Manufacturer
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- J2655FAW0750C2
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Original Design
- Original Design
- 167-8396979 ITEM 24
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 167-8396979
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-641-6072
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.812 Inches Nominal
- End Item Identification [AGAV]
- Hatch 38X38
- Material Document And Classification [MDCL]
- J2655, Ty-Faw National Std/Spec Single Material Response Overall
- Material [MATT]
- Copper Alloy Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Washer, Flat, Round Wide
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 2.000 Inches Nominal
- Thickness [ABNM]
- 0.148 Inches Nominal
Weapon Systems (WSDC) 5310-01-641-6072
DLA Procurement Analysis 5310-01-641-6072
Management Data 5310-01-641-6072
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-641-6072
Freight Information 5310-01-641-6072
5310-01-641-6072 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-641-6072 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-641-6072 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-641-6072 is not classified as a special type of cargo when transported by water. 5310-01-641-6072 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-641-6072 4 Records
Contracting Technical Data File (CTDF) 5310-01-641-6072 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: