Premium Information is available for this item - Upgrade for $1 a day
5310-01-625-0750
Flat Washer
5310016250750 016250750 LS1091528-8 LS1091528
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-625-0750
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-625-0750 5+ Documents (More...)
Flat Washer 5310016250750 016250750 -8 LS1091528 A washer having a centrally located hole with
(Active) Primary Buy RNCC 3 RNVC 2 DAC B LS1091528 01417 - General Dynamics Land Systems Inc. https/
Flat Washer 5310016250750 016250750 -8 LS1091528 A washer having a centrally located hole with
(Active) Primary Buy RNCC 3 RNVC 2 DAC B LS1091528 01417 - General Dynamics Land Systems Inc. https/
01417 - General Dynamics Land Systems Inc. https/ (Active) Primary Buy RNCC 3 RNVC 2 DAC B LS1091528
Flat Washer 5310016250750 016250750 -8 LS1091528 A washer having a centrally located hole with
/fsg-62/fsc-6210/fr
Flat Washer 5310016250750 016250750 5310-01-625-0750 5310016250750 016250750 is a washer having
Flat Washer 5310016250750 016250750 5310-01-625-0750 5310016250750 016250750 is a washer having
Restrictions 5310-01-625-0750
5310-01-625-0750 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-625-0750
- US Army (A204)
- Effective Date:
- 1 Jan 2014
Approved Sources 5310-01-625-0750
- Part Number
- Manufacturer
- Status
- LS1091528-8
- Manufacturer
- 01417 - General Dynamics Land Systems Inc. (Active)
- Primary Buy
- Primary Buy
- LS1091528
- 01417 - General Dynamics Land Systems Inc. (Active)
- Informational Drawing
- Informational Drawing
Management Data 5310-01-625-0750
Army
- Materiel Category and Inventory Manager:
- K
- Tactical and Support Vehicles, Combat and Automotive Materiel
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- M8
- Armored Carriers
Light Armored Vehicle
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 5310-01-625-0750
Freight Information 5310-01-625-0750
5310-01-625-0750 has freight characteristics.. 5310-01-625-0750 has a variance between NMFC and UFC when transported by rail and the description should be consulted.