Premium Information is available for this item - Upgrade for $1 a day
5310-01-621-8092
Flat Washer
5310016218092 016218092 33076 3011428 S000010
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
3
Marketplace 5310-01-621-8092
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-621-8092 5+ Documents (More...)
to enable JavaScript in your web browser . 7025-14-483-7512Disk Drive Unit7025144837512 144837512 S000010
your Account Upgrade 5310-01-564-6567Flat Washer5310015646567 015646567 12759-00808 33819 3011435 S000010
your Account Upgrade 5310-01-564-6567Flat Washer5310015646567 015646567 12759-00808 33819 3011435 S000010
-507-9756Flat Washer5310015079756 015079756 12759-00281 AEW01X406812BD6A81 10001642 33815 3244045 S000010
your Account Upgrade 5310-01-564-6567Flat Washer5310015646567 015646567 12759-00808 33819 3011435 S000010
-507-9756Flat Washer5310015079756 015079756 12759-00281 AEW01X406812BD6A81 10001642 33815 3244045 S000010
your Account Upgrade 5310-01-564-6567Flat Washer5310015646567 015646567 12759-00808 33819 3011435 S000010
-507-9756Flat Washer5310015079756 015079756 12759-00281 AEW01X406812BD6A81 10001642 33815 3244045 S000010
-507-9756Flat Washer5310015079756 015079756 12759-00281 AEW01X406812BD6A81 10001642 33815 3244045 S000010
Upgrade your Account Upgrade 5340-01-540-7684Loop Clamp5340015407684 015407684 S332SSG10 1001049 S000010
Restrictions 5310-01-621-8092
5310-01-621-8092 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-621-8092
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-621-8092
- US Army (A919)
- Effective Date:
- 1 Sep 2013
- Supplementary Receivers:
- AZ
- US Air Force (FGGI)
- Effective Date:
- 1 Sep 2013
- US Marine Corps (MC47)
- Effective Date:
- 1 Sep 2013
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2013
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-621-8092
- Part Number
- Manufacturer
- Status
- 33076
- Manufacturer
- 0Y3H3 - Fastenal Company (Active)
- Primary Buy
- Primary Buy
- 3011428
- 1EFH8 - General Dynamics Land Systems - (Active)
- Secondary Buy
- Secondary Buy
- S000010
- 1EFH8 - General Dynamics Land Systems - (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-621-8092
DLA Procurement Analysis 5310-01-621-8092
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-621-8092
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-01-621-8092
Freight Information 5310-01-621-8092
5310-01-621-8092 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-621-8092 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-621-8092 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-621-8092 is not classified as a special type of cargo when transported by water. 5310-01-621-8092 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-621-8092 4 Records
Contracting Technical Data File (CTDF) 5310-01-621-8092 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: