Premium Information is available for this item - Upgrade for $1 a day
5310-01-618-6287
Flat Washer
5310016186287 016186287 NAS1149C0532R AN960C516L
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
6
Marketplace 5310-01-618-6287
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-618-6287 5+ Documents (More...)
NAS1149C0532R WASHER,FLAT 2800 EA NS Request Quotation AN960C516L WASHER,FLAT 21433 EA NS Request Quotation
AN960C516L WASHER,FLAT 20 EA NS Request Quotation Subscribe to View Vendor Details...
AN960C516L WASHER,FLAT 20 EA NS Request Quotation Subscribe to View Vendor Details...
NAS1149C0532R WASHER,FLAT 2800 EA NS Request Quotation AN960C516L WASHER,FLAT 21433 EA NS Request Quotation
AN960C516L WASHER,FLAT 20 EA NS Request Quotation Subscribe to View Vendor Details...
AN960C516L WASHER,FLAT 21433 EA NS Request Quotation NAS1149C0532R WASHER,FLAT 2800 EA NS Request Quotation
AN960C516L WASHER,FLAT 20 EA NS Request Quotation Subscribe to View Vendor Details...
NAS1149C0532R WASHER,FLAT 2800 EA NS Request Quotation AN960C516L WASHER,FLAT 21433 EA NS Request Quotation
NAS1149C0532R WASHER,FLAT 234 HD NS Request Quotation AN960C516L WASHER,FLAT 709 HD NS Request Quotation
AN960C516L WASHER,FLAT 15 HD NS Request Quotation Subscribe to View Vendor Details...
Restrictions 5310-01-618-6287
5310-01-618-6287 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-618-6287
- US Air Force (FGGI)
- Effective Date:
- 1 Apr 2013
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2014
- Supplementary Collaborators:
- GG
Approved Sources 5310-01-618-6287
- Part Number
- Manufacturer
- Status
- AN960C516L
- Manufacturer
- 81352 - Air Force-Navy Aeronautical (Active)
- Inactive Standard
- Inactive Standard
- NAS1149C0532R
- 80205 - National Aerospace Standards (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 5310-01-618-6287
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.318 Inches Minimum And 0.338 Inches Maximum
- End Item Identification [AGAV]
- Hh60 Heli
- Material [MATT]
- Steel Comp 301 Or Steel Comp 302 Or Steel Comp 304 Or Steel Comp 316 Or Steel Comp 321 Or Steel Comp 347 Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Washer Flat
- Material Document And Classification [MDCL]
- Ams5901 Assn Std 1St Material Response Or Ams5516 Assn Std 2Nd Material Response Or Ams5513 Assn Std 3Rd Material Response Or Ams5524 Assn Std 4Th Material Response Or Ams5510 Assn Std 5Th Material Response Or Ams5512 Assn Std All Material Responses Overall
- Overall Diameter [ADAV]
- 0.557 Inches Minimum And 0.582 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Specification/Standard Data [ZZZK]
- 80205-Nas1149c0532r Professional/Industrial Association Standard
- Surface Treatment Document And Classification [STDC]
- Ams 2700, Method 1, Type 6 Or Type 7, Class1 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thickness [ABNM]
- 0.028 Inches Minimum And 0.036 Inches Maximum
Weapon Systems (WSDC) 5310-01-618-6287
DLA Procurement Analysis 5310-01-618-6287
- Last Stock Position:
- 3477 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-618-6287
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Jul 2023
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2022
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-618-6287
Freight Information 5310-01-618-6287
5310-01-618-6287 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-618-6287 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-618-6287 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-618-6287 is not classified as a special type of cargo when transported by water. 5310-01-618-6287 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-618-6287
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-618-6287 1 Records
Contracting Technical Data File (CTDF) 5310-01-618-6287 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: