Premium Information is available for this item - Upgrade for $1 a day
5310-01-616-7710
Flat Washer
5310016167710 016167710 20-668 B9789 ITEM 4
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-616-7710
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-616-7710 5+ Documents (More...)
20-668 B9789 Part NumberManufacturerStatus20-668 28953 - Rix Industries (Active) Primary Buy RNCC 3
89B97 Cones It, Llc in Thornton, CO United States https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-616-7710
20-668 B9789 Part NumberManufacturerStatus20-668 28953 - Rix Industries (Active) Primary Buy RNCC 3
89B97 Cones It, Llc in Thornton, CO United States https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-616-7710
Flat Washer 5310016167710 016167710,20-668 for $1 a day Upgrade your Account Upgrade 5310-01-616
-7710Flat Washer5310016167710 016167710 20-668 B9789 Part NumberManufacturerStatus20-668 28953 - Rix
20-668 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-616-7710 Flat Washer 5310016167710 016167710,20
-668 Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-616-7710Flat Washer5310016167710 016167710
Restrictions 5310-01-616-7710
5310-01-616-7710 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-616-7710
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-616-7710
- US Navy (N9BZ)
- Effective Date:
- 1 Feb 2013
- Supplementary Collaborators:
- KE
Approved Sources 5310-01-616-7710
- Part Number
- Manufacturer
- Status
- 20-668
- Manufacturer
- 28953 - Rix Industries (Active)
- Primary Buy
- Primary Buy
- B9789 ITEM 4
- 28953 - Rix Industries (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-616-7710
DLA Procurement Analysis 5310-01-616-7710
Management Data 5310-01-616-7710
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-616-7710
Freight Information 5310-01-616-7710
5310-01-616-7710 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-616-7710 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-616-7710 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-616-7710 is not classified as a special type of cargo when transported by water. 5310-01-616-7710 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-616-7710 2 Records
Contracting Technical Data File (CTDF) 5310-01-616-7710 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: