Premium Information is available for this item - Upgrade for $1 a day
5310-01-612-0318
Flat Washer
5310016120318 016120318 133-1207
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-612-0318
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-612-0318 5+ Documents (More...)
RQST NE Related Documents 6340-00-133 Flat Washer 5310016120318 016120318,133-1207 5310/us 5310-01-612
-0318 Flat Washer 5310016120318 https//www.nsnlookup.com /fsg-59/fsc-5910/it 5910-15-133-1207 Capacitor
RQST NE Related Documents 6340-00-133-1207 2+ Documents ( More RQST NE Related Documents 6340-00-133
Flat Washer 5310016120318 016120318,133-1207 5310/us 5310-01-612-0318 Flat Washer 5310016120318
-15-133-1207 RQST Updated Every fsg-53/fsc-5310/us 5310-01-612-0318 Flat Washer 5310016120318 016120318,133
-1207 133-1207 Day 5910-15-133-1207 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-612-0318 Flat
-01-133-1207 Quartz Crystal Unit 5955011331207011331207 United States (US) 4. 5955-01-133-1207 Marketplace
United States (US) 4. 5955-01-133-1207 https//www.nsnlookup.com /fsg-59/fsc-5910/it 5910-15-133-1207
6130-25-133-1207 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-61/fsc-6130/no 6130-25-133-1207
Day 6130-25-133-1207 RQST NE Related Documents 6130-25-133-1207 5+ Documents ( More... ) https//www.nsnlookup.com
Restrictions 5310-01-612-0318
5310-01-612-0318 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-612-0318
- US Air Force (FGGI)
- Effective Date:
- 1 Oct 2012
- Denmark (ZS01)
- Effective Date:
- 1 Oct 2012
Approved Sources 5310-01-612-0318
- Part Number
- Manufacturer
- Status
- 133-1207
- Manufacturer
- 11083 - Caterpillar Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-612-0318
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Hole Diameter [AAUB]
- 21.1 Millimeters Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 28.1 Millimeters Nominal
- Center Hole Shape Style [ABMX]
- Round
- Thickness [ABNM]
- 0.9 Millimeters Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Washer
Weapon Systems (WSDC) 5310-01-612-0318
DLA Procurement Analysis 5310-01-612-0318
Management Data 5310-01-612-0318
Similar Supply Items to 5310-01-612-0318
Freight Information 5310-01-612-0318
5310-01-612-0318 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-612-0318 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-612-0318 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-612-0318 is not classified as a special type of cargo when transported by water. 5310-01-612-0318 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-612-0318
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-612-0318 2 Records
Contracting Technical Data File (CTDF) 5310-01-612-0318 April 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- G
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: