Premium Information is available for this item - Upgrade for $1 a day
5310-01-609-2782
Flat Washer
5310016092782 016092782 ASTM F436
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
1
Marketplace 5310-01-609-2782
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-609-2782 5+ Documents (More...)
Updated Every Day 5310-01-609-2782 RQST NE Related Documents 5310-01-609-2782 5+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-609-2782 Flat Washer 5310016092782016092782 ASTM
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-703-3566 Flat Washer 5310017033566017033566 ASTM F436
Flat Washer 5310016092782 016092782 RQST NE Updated Every Day 5310-01-609-2782 RQST https//www.nsnlookup.com
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-691-9533 Flat Washer 5310016919533016919533 ASTM F436
Flat Washer 5310016092782 016092782 3566Flat Washer5310017033566 017033566 ASTM F436 https//www.nsnlookup.com
01-649-3368 DEMIL: A | DEMILI : 1 | CRITICALITY https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-609-2782
Flat Washer 5310016092782 016092782 9533Flat Washer5310016919533 016919533 ASTM F436 https//www.nsnlookup.com
NumberManufacturerStatus33173 0Y3H3 - Fastenal Company (Active) Primary Buy RNCC 3 RNVC 2 DAC 4 ASTM F436
Restrictions 5310-01-609-2782
5310-01-609-2782 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-609-2782
- US Marine Corps (MC47)
- Effective Date:
- 1 Jul 2012
Approved Sources 5310-01-609-2782
- Part Number
- Manufacturer
- Status
- ASTM F436
- Manufacturer
- 51744 - Beta Fueling Systems, Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-609-2782
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- End Item Identification [AGAV]
- 3990-01-588-3373 - Flatrack Refueler
- Part Name Assigned By Controlling Agency [CXCY]
- Zinc Pld Stl 3/4 Nom
Weapon Systems (WSDC) 5310-01-609-2782
DLA Procurement Analysis 5310-01-609-2782
- Last Stock Position:
- 2024 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-609-2782
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- AH
- LGM-30 MINUTEMAN
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-01-609-2782
Freight Information 5310-01-609-2782
5310-01-609-2782 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-609-2782 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-609-2782 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-609-2782 is not classified as a special type of cargo when transported by water. 5310-01-609-2782 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-609-2782
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-609-2782 3 Records
Contracting Technical Data File (CTDF) 5310-01-609-2782 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: