Premium Information is available for this item - Upgrade for $1 a day
5310-01-603-0203
Flat Washer
5310016030203 016030203 60020123 24KP198 99904661
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
3
Marketplace 5310-01-603-0203
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-603-0203 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-603-0203 RQST NE Updated Every Day 5310-01-603-0203 RQST
Updated Every Day 5310-01-603-0203 RQST NE Related Documents 5310-01-603-0203 5+ Documents ( More...
Flat Washer 5310016030203 016030203,60020123 Upgrade your Account Upgrade 5310-01-603-0203Flat
Washer5310016030203 016030203 60020123 24KP198 99904661 Gear3020016028359 0160283597005516799904661 Flat
Flat Washer 5310016030203 016030203,60020123 Upgrade your Account Upgrade 5310-01-603-0203Flat
Washer5310016030203 016030203 60020123 24KP198 99904661 $1 a day Upgrade your Account Upgrade 3020-01
Flat Washer 5310016030203 016030203,60020123 Upgrade your Account Upgrade 5310-01-603-0203Flat
Washer5310016030203 016030203 60020123 24KP198 99904661 $1 a day Upgrade your Account Upgrade 3020-01
$1 a day Upgrade your Account Upgrade 3020-01-602-8359Spur Gear3020016028359 016028359 70055167 99904661
day Upgrade your Account Upgrade 5340-01-603-0598Mounting Plate5340016030598 016030598 60105964 99904661
Restrictions 5310-01-603-0203
5310-01-603-0203 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-603-0203
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-603-0203
- US Marine Corps (MC47)
- Effective Date:
- 1 Feb 2012
Approved Sources 5310-01-603-0203
- Part Number
- Manufacturer
- Status
- 60020123
- Manufacturer
- 54209 - Iowa Mold Tooling Co Inc (Active)
- Primary Buy
- Primary Buy
- 24KP198
- 75Q65 - Oshkosh Defense Llc (Active)
- Secondary Buy
- Secondary Buy
- 60020123
- 45152 - Oshkosh Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 24KP198
- 45152 - Oshkosh Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 99904661
- 54209 - Iowa Mold Tooling Co Inc (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-603-0203
DLA Procurement Analysis 5310-01-603-0203
Management Data 5310-01-603-0203
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-01-603-0203
Freight Information 5310-01-603-0203
5310-01-603-0203 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-603-0203 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-603-0203 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-603-0203 is not classified as a special type of cargo when transported by water. 5310-01-603-0203 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-603-0203 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: